第一篇：國家關于補償貿易的規定（xiexiebang推薦）

國家關于補償貿易的規定

時間：2012-11-30 16:13 作者： 來源：互聯網【找法網 補償貿易合同】補償貿易是指由外國廠商或者利用國外出口信貸進口生產技術和設備，由我方企業進行生產，以返銷其產品的方式分期償還對方技術、設備價款或貸款本息的交易方式。直接用國內產品同國外廠商交換設備、原材料、元器件或成品，以貨換貨，屬于易貨貿易，不屬補償貿易的范圍。

按照國家有關規定，除經批準在過渡寬限期內的補償貿易項目外，自1996年4月1日起取消補償貿易項目進口加工設備免征關稅和進口環節稅的規定。上述貿易項目進口的設備按一般貿易規定辦理手續。其進口設備一律照章征稅。1996年4月1日前(不含當日，下同)外經貿部門在其審批權限內依法批準的補償貿易項目且在1996年5月15日(含當日)前經主管海關登記備案，其加工設備于1996年12月31日(含當日)前進口的，仍可按原優惠政策辦理。對設備進口額在3000萬美元(不包括1995年12月28日以后追加的投資)以上的，可通過對外貿易經濟合作部報國務院批準后，寬限期可延長至1997年12月31日。有關補償貿易合同在補償完畢后，對繼續出口的產品以及用其出口收匯購進的設備等，海關按一般貿易進出口貨物辦理有關手續。補償貿易出口的補償產品，原則應返銷給提供技術設備的外商，但如有特殊情況，可將有關補償產品返銷給雙方指定的第三方代銷人，進行三角補償。實行三角補償?shù)暮贤?，?yīng)由我方經營單位與提供技術設備的外商以及代銷補償產品的第三方共同簽字確認后，方可享受補償貿易的優惠。

補償貿易引進技術設備如屬進口許可證或特定產品目錄管理的商品，應向經貿部主管部門申領進口貨物許可證或報國家機電進出口辦審批。海關憑上述進口許可證或機電產品進口證明予以辦理有關手續。

補償貿易項下進口技術設備，自進口之日起至補償產品出口全部?jī)斶€設備價款為止，屬海關監管貨物。未經經貿主管部門批準和報經主管海關核準許可，任何單位或個人均不得擅自出售、轉讓或提取移作它用。如因故確需變賣處理的，在征得上述有關部門批準許可后，應按一般貿易辦理有關進口手續。1

第二篇：補償貿易協議

Agreement on Compensation Trade

The undersigned representatives of Party A and Party B have agreed to conclude this Agreement according to the terms and conditions stipulated below: 1.Commodity:(1)Party A undertakes to supply in one shipment a complete set of Equipment for asparagus processing line, the details of which are shown in the attached List A.(2)Party B undertakes to compensate Party A for the contract amount by exporting in two lots 3000 cartons Canned Asparagus.Specifications are detailed in the attached List B.2.Price:(1)At J￥22200000.00 per set of Equipment C&F Qingdao consisting of: J￥20300000.00

FOB Yokohama J￥950000.00

Ocean Freight J￥950000.00

Interest(2)At J￥7400.00 per carton of Cannned Asparagus FOB Qingdao 3.Time of Shipment:(1)By the end of February,2003(for Equipment)(2)During July/August,2003(for Canned Asparagus)4.Port of Shipment:(1)Yokohama, Japan(for Equipment)(2)Qingdao, China(for Canned Asparagus)5.Port of Destination:(1)Qingdao, China(for Equipment)(2)Yokohama, Japan(for Canned Asparagus)6.Terms of Payment: By reciprocal letters of credit.(1)Party B shall, within 15 days after signing this Agreement, establish in favour of Party A an irrevocalbe Banker’s Acceptance L/C in payment for the Equimpent, for an amout not less than J￥22200000.00, available by draft at 180 days sight.The irrevocable L/C will be effective only after receipt by Party B of a satisfactory reciprocal L/C opened by Party A for payment of the Equipment in time, provide the required documents according to Article 7 of this agreement together with the draft at 180 days sight, and obtain its bank’s acceptance.(2)From the date of acceptance of the draft and not later than 7 days thereafter, Party A shall reciprocally establish in favour of Party B an irrevocable L/C in payment for the Canned Asparagus, for an amout not less than J￥22200000.00, available by sight draft.The stipulations of this reciprocal L/C shall be in conformity with those in this Agreement.7.Documents: Both parties shall present to the paying bank the following documents for negotiation:(1)One set of negotiable clean on board Bill of Lading made out to order, bank endorsed and marked: a.“Freight Prepaid”(in the case of Equipment)b.“Freight to be collected”(in the case of Canned Asparagus)(2)Three copies of Invoice(3)Three copies of Packing List(4)Certificate of Quality issued by the Manufacturer or a competant authority.(5)Copy of the cable sent to the Buyer immediately after shipment, advising the vessel’s name, date of shipment, quality and amout involved.8.Guarantee of Quality:(1)Party A guarantees that the Equipment is made of the best materials with first class workmanship, brand-new and unused, and complies in all respects with the quality and specifications stipulated in this Agreement.The guaranteed period shall be 12 months counting from the date of the Bill of Loading.(2)Party B guarantees that the Canned Asparagus is up to the Chinese Export Standard.9.Remarks: Party A shall despatch an engineer to the installation site to assist the installation work and test run.Air tickets between China and Japan shall be for Party A’s account, and such expenses as for inland traffic, meals and lodging in China shall be borne by Party B.Party A

Party B

Signed at Qingdao this 5 th day of January 2003.補償貿易協議 在下面簽名的甲乙雙方代表同意訂立本協議，其條款如下：

1.商品：

（1）甲方保證整批供應蘆筍加工全套設備，細節詳見附表一。

（2）乙方保證出口整批共3000紙箱蘆筍罐頭以向甲方補償設備合同金額，規格詳見附表二。

2.價格：

（1）加工設備每套的成本加運費到青島價格為2220萬日元，包括：

橫濱離岸價

2030萬日元 海洋運費

95萬日元 利息

95萬日元

（3）蘆筍罐頭每紙箱青島離岸價7400萬日元。3.裝船期：

（1）加工設備在2003年底。（2）蘆筍罐頭在203年七、八月份。4．裝貨港

（1）加工設備在日本橫濱（2）蘆筍罐頭在中國青島 5．目的港：

（1）加工設備到中國青島（2）蘆筍罐頭到日本橫濱 6.支付條款：用對開信用證

（1）乙方在簽約后15天內，為加工設備開出以甲方為受益人的、不可撤銷的、銀行承兌的信用證，其金額不少于2220萬日元，見票180天付款。這份不可撤銷的信用證，只有在乙方收到甲方為蘆筍罐頭對開的信用證后才能生效。甲方在收到這份不可撤銷的信用證后，應及時裝運加工設備，提供本協議第七條所需的單證和180天到期的匯票，以便取得他的銀行的承兌。

（2）甲方應在其匯票得到銀行承兌后7天內為蘆筍罐頭對開以乙方為受益人的、不可撤銷的信用證，其金額不少于2220萬日元，見票即付。該對開信用證的條款應與本協議的規定一致。7．單證：

雙方在議付時均應向付款后遞交下列單證：

（1）整套可轉讓的、已裝船的、清潔的、待制定的、空白背書提單，并分別注明：

a.加工設備的“運費已付” b.蘆筍的“運費待收”。（2）發票一式三份。（3）裝箱單一式三份。

（4）制造廠或有關當局出具的品質檢驗證。（5）裝船后立即發給買方的有關船名、裝船日

期、數量、金額的電報通知的副本。

8.品質保證：

（1）甲方保證該設備是用最好材料和頭等工藝制造的，嶄新而未用過，在各方面均符合本協議的品質和規格的規定。保證期為12個月，從提單日期起算。

（2）乙方保證蘆筍罐頭品質達到中國出口標準。9.備注：

甲方應派一名工程師到安裝現場，協助安裝和試車工作。中日間的機票費用應由甲方負擔，中國境內的交通食宿費用則由乙方負擔。

甲方

乙方

2003年1月5日于青島。

第三篇：補償貿易合同

補償貿易合同

本合同于_________年_________月_________日在中國_________簽訂。甲方為：中國_________公司

法定地址：_________

電話：_________

電傳：_________ 乙方為：_________國公司

法定地址：_________

電話：_________

電傳：_________ 第一條 貿易內容

（一）乙方向甲方提供用于生產的_________型機械_________臺，以及各種其他輔助機械設備，并同時提供各類機械設備所必需的附配件及備用件，以及在生產過程中各種必需的測試儀器。具體的各類機械設備、測試儀器、附、配件、備用件之型號、名稱、規格、數量、價格、包裝要求、交貨期限等，由雙方另行簽訂設備進口合同，作為本合同不可分割的一部分。

（二）甲方用乙方提供的機械設備所生產的部分產品以及其他商品，或經雙方協商，用_________工廠生產的_________商品來償付全部機械設備的價款。具體的償付商品的名稱、數量、價格、交貨期限等，由雙方另行簽訂補償商品供貨合同，作為本合同不可分割的一部分。設備進口合同與補償商品供貨合同可合并為補償貿易購銷合同（見附件）。

第二條 支付條件與方式

由甲乙雙方對開信用證，即由甲方分期開出以乙方為受益人的遠期信用證，分期、分批支付全部機械設備的價款；乙方開出以甲方為受益人的即期信用證，支付補償商品的貨款。甲方用乙

方支付補償商品的貨款，來支付全部機械設備的價款。當乙方支付的貨款不能相抵甲方所開的遠期信用證之金額時，其差額部分由乙方用預付貨款方式，在甲方所開的遠期信用證到期前匯付甲方，以使甲方能按時議付所開的遠期信用證。甲方所開的遠期信用證的按期付款，是基于乙方按規定開出限期信用證及按規定預付貨款。乙方保證按規定開出信用證及預付貨款。第三條 償付期限

甲方用_________年零_________個月，分月和商品償付全部機械設備的價款。償還日期自第一批機械設備到貨后約_________個月后開始，原則上每月償還的金額是全部機械設備價款的_________分之_________。甲方可以提前償還，但需在_________個月前通知乙方。

在甲方用補償商品償還機械設備價款期間，乙方應按本協議項下的有關補償商品合同的規定，開出以甲方為受

益人的足額、限期、不可撤銷，可分割、可轉讓的信用證。

第四條 計價貨幣和作價標準

雙方商品均用_________幣計價。乙方提供的全部機械設備及所有儀器、附配件用_________幣作價，甲方提供的補償商品則按簽訂合同時甲方出口貨物的人民幣基價，以當時的人民幣對_________幣的匯率折算為_________幣。

第五條 利息計算

甲方所開的遠期信用證及乙方所預付貨款的利息應由甲方負擔。雙方議定年利息為百分之_________。第六條 技術服務

貨物到達甲方口岸后，由甲方自行安裝，但在主要設備安裝過程中，甲方認為需要時，乙方必須派出技術人員進行現場指導，提供必要的技術服務，在此過程中由于技術上的問題，所造成的損失由乙方負責。

經雙方協調，為完成此項工作，由

乙方派出_________數量的技術人員。在中國的一切費用均由乙方承擔。第七條 附加設備

在執行在協議過程中，如發現本合同項下的機械設備在配套生產時需要繼續增添新的機械設備或測試儀器時，可由雙方另行協調，予以增訂。增訂的項目仍應列入本合同范圍之內。第八條 保險

設備進口以后由乙方投保。設備所有權在付清貨款后發生轉移，之后，如發生意外，損失先由保險公司向投保人賠付，再按比例退回甲方已支付的設備貨款。

第九條 違約責任

乙方不按合同規定購買補償商品或甲方不按合同規定提供商品時，均應按合同條款承擔違約責任，賠償由此造成的經濟損失，并向?qū)Ψ街Ц对擁?xiàng)貨款總值的_________％的罰款。第十條 履約保證

為保證合同條款的有效履行，雙方

分別向?qū)Ψ教峁┯筛髯砸环姐y行出具的保函，予以擔保。甲方的擔保銀行為中國銀行_________分行，乙方的擔保銀行為_________國_________銀行。第十一條 合同條款的變更

本合同內容如遇特殊情況需要變更，須經雙方協商一致。第十二條 不可抗力

由于人力不可抗拒的原因，致使一方或雙方不能履行合同有關條款，應及時向?qū)Ψ酵▓?bào)情況，在取得合法機關的有效證明之后，允許延期履行或不履行有關合同義務，并可根據情況部分或全部免除違約責任。第十三條 仲裁

凡是有關本協議或執行本協議而發生的一切爭議，應通過友好協商解決。如不能解決，則應提交_________國_________仲裁委員會按_________仲裁程序在_________進行仲裁。仲裁適用法律為_________國法律。該仲裁委員會作出的裁決是最終的，甲乙雙方均受其約

束，任何一方不得向法院或其它機關申請變更。仲裁費用由敗訴一方負擔。第十四條 文字、生效

本合同用中、_________兩種文字寫成，兩種文字具有同等效力。

本合同自簽字之日起生效，有效期為_________年。期滿后，雙方如愿意繼續合作，經向中國政府有關部門申請，獲得批準后，可延期_________年或重新簽訂合同。

甲方（簽字）：_________

乙方（簽字）：_________

_________年____月____日

_________年____月____日

簽訂地點：_________

簽訂地點：_________

附件

party a: _________company，china.address:_________

tel: _________

telex: _________

party b: _________ company

address: _________

tel: _________

telex: _________ article 1 introduction

（1）party b shall provide party a with _________machines of model _________to be used in with them shall also be provided various kinds of supporting machinery，accessories and spare parts it needs，and the various kinds of measuring and testing instruments required in the course of production，the specific models，names，specifications，quantity，unit prices，packing requirements and the deadline for delivery shall be specified in an additional contract to be made between the both parties，which will serve as a integral part of the contract.（2）the total cost of the entire machinery and its supporting equipment shall be paid to party b of the part of the

products and/or other commodities produced by party a with the machinery supplied by party may also be paid to party b of(a certain product)turned ort by.(this practice is hereinafter referred to as a make-up payment).the specific names，quantity and unit price of the products to be delivered as make-up payment，and the deadline for delinery，are to be specified in an additional contract between the two parties on products-supplying as makeand sell contract on compensation trade.article 2 terma of payment

the two parties shall open a l/c in favour of each a shall open，at regular intervals，long-term l/c in favour of party b to pay in install ments the entire cost of the machinery and its support sight l/c in

favour of {arty a as a payment for the cost of the products to be delivered by party a shall pay for the total cost of the machinery and its supporting equipment with the sum of money which party b shall pay the products to be delivered by party a as a maketerm l/c is determined by the atrp payment on a monthmonth basis，and pay is off within a preriod of _________ years and _________ payment shall start approximately _________

months after the first delivery of the machinery is made.in principle，the sum to be paid per month shall be _________ percent of the total amount due to be paid for the machinery party a can make its payment ahead of schedule with a notice given to party b _________ months in the compensation period，party b shall open a l/c in favour of party b，covering the total amount，at sight，irrevocable，divisible and assignable，in accordance with the relevant provisions in the buysell contract on compensation trade.article 4 currency for pricing

products provided by either party shall be priced in terms of_________.all the items supplied by party b，including machinery，the required apparatus，accessories and spare parts shall be priced directly in terms of _________ above mentioned;while the products provided by

party a as a maketerm l/c and the down payment of party annual interest rate is agreed upon at _________%.article 6 technical service

after arrival at the destination port，the machinery shall be assembled by party party a believes it is necessary，party b shall send its technicians to provide on-the-spot instructions and other required technical assistance during the course of assembling.party b shall be liable for the losses incurred in the coures fo assembling

as a result of technical default of its prat.after approval by both parties，party b shall send a group of technicians to china to faciliate the completion of the project.the cost incurred in china shall be borne by party b.article 7 additional equipment

in the course of implementing the contract if it is foun necessary that，in addition to the machinery and accessories already listed in the provisions，some additional items of the equipment and measuring and testing apparatus are needed，an additional order shall be agreed upon through negotiation.the items thus added shall be incorporated in the contract.article 8 insurance

after being delivered in china，the machinery and its supporting equipment shall be insured by party b.the unforeseen losses in connection with the equipment

shall be indemnified for by the insurance company first to the insurer(party b)in case the equepment has already been paid off for and thus transferred into party a’s a proportional part of the sum paid by the insurance company shall be allotted to party a to cover the payment party a has already made for the items of equipment involved the losses.article 9 liability for breach

either party shall be liable for a breach of contract in accordance with the provisions in the contract and shall indemnify for all the losses thus if party b should fail to make purchase of the products to be delivered by party a as make-up payment，or party a should fail to deliver the products for compensation.in such case，the breaching party shall pay to the other a sum as a fine，which shall account for _________ % of the total cost the products

in question.article 10 performance guarantee

to guarantee the implementation of the contract，each party shall submit to the other a performance guarantee issued by a bank agreed by both parties.the guarantee bank of party a is bank of china，while that of party b is _________ bank.article 11 amendment of the contract

when the contract needs to be amended in certain particular cases，the amendment can be effected only after it is agreed upon by both parties through consultation.article 12 force majeure

either party shall not be held resposible for failure or delay to perform all or any part of the contract due to flood，fire earthquake，drought，war or any other events which coule not be predicted at the time of the conclusion of the contract，and could not be controlled，avoided or overcome by the parties.however，the party effected by the event of force majeure shall inform the other party of its occurrence in written as soon as possible and thereafter send a certificate of the event issued by the relevant authority to the other party but no later than 15days after its occurrence.in the event of force majeure last over 120 days，both parties shall negotiate the performance or the termination of the contract.article 13 arbitration

all disputes arising from the performance of this contract should be settled through friendly negotiations.should no settlement be reached through engotiation，the case shall then be submitted for arbitration to the china international economic and trade arbitration commission(beijing)and the rules of this commission shall be applied.the arbitration fee shall be borne by the losing party unless otherwise awarded by the arbitration organization.in the event of force majeure last over 120 days，both parties shall negotiate the performance or the termination of the contract.during the course of the arbitration，the contract shall be performed except for the part under arbitration.article 14 language and effective date

the contract shall be written in chinese and in english.both languages are equally authentic.in the events of any discrepancy between the two abovementioned versions，the chinese version shall prevail.the contract shall become effective when the contract is signed by both parties.the effective period of the contract shall be years.based on the willingness to continue the contract，both parties shall submit a

application to relavant department of chinese government for the extension of the contract or reach a new contract when the contract expires.partya(signature): _________

partyb(signature): _________ date:_________

date:_________

第四篇：補償貿易合同

補償貿易合同

本合同由 公司，主營業所在中國（以下稱甲方），與 公司，主營業所在美國（以下稱乙方）于 年 月 日在中國XX簽署

茲證明

鑒于乙方擁有現用于制造鋼絲繩的機器設備，并愿意將機器設備賣給甲方

鑒于乙方同意購買甲方用已方提供的機器設備生的產鋼絲繩，以補償其機器設備的價

鑒于甲方向意向乙方出售鋼絲繩，以償還乙方的機器設備價款；

因此，考慮到本協議所述的前提和約定，甲、乙雙方物此立約：

1．購買協議

甲方同意從乙方按一下列條款購買下述商品：

1.1商品、規格及其生產能力：

商品：

規格：

生產能力：

1.2 數量：

1.3 價格：

XX港FOB價：

單價： 總價：

1.4 支付：

機器設備價款以甲方的產品--鋼絲繩償還，全部?jī)r(jià)款在邊疆三年內平均三次付清，自XX日開始支付。

1.5 裝運：

裝運期：

裝運港：

目的港：

裝運嘜頭：

1.6 保險：

由甲方保險。

1.7 檢驗：

1.8 保證：

乙方保證其機器設備從未用這，性能先進，質量好，并保證該機器能生產XX規格鋼絲繩，產量每小時 米。

2.銷售協議

甲方以鋼絲黽償還購買乙方機器設備的價款。

2.1 商品及規格：

商品：

規格：

2.2 數量：

鍘絲繩每年XX米。

2.3 價格：

鋼絲繩的價格按交貨時國際市場CIF價確定

2.4 裝運：

每年兩次裝運，一次在六月，另一次在十二月，每次貨價為。

裝運港：

目的港：

法語運嘜頭：

2.5包裝：

木卷軸裝。

2.6支付：

憑以甲方為受益人的保兌的，不可撤銷的即期信用證，允許轉船。信用證必須于裝運日期前15天到達甲方，有效期不少于90天。

信用證要與本合同完全一致，否則，乙對遲裝負責；而且，甲方有機就其中的損失向乙方提出索賠。修改信用證的費用由乙方承擔。

2.7保驗：

甲方保險，投保水漬險和戰爭險，投保金額為發票金額加10%

2.8 檢驗：

甲方出具的品技檢驗證書為最后依據。若貨到后乙方發現質量與上述規定不符，乙方在貨到目的港后45天內通知甲方，雙方協商解決有爭義的問題。

3.不可抗力

若因不可抗力事故，甲方或乙方對未交或遲交本合同項下的部分或全部貨物不負責任。

4.仲裁

有關或執行本合同的一切爭議應該友好協商解決。若達不成協議，有關爭議案則提交XX仲裁。仲裁決定為終局的，并對雙方均具有約束力。

5.適用法律

本合同的簽訂，解釋和履行以中華人民共和國法律為準。

6.正本條款

本合同以英文書寫，正本兩份，每方各持一份。

7.有效期

甲方：

乙方：

.動產贈與合同

贈與人（以下簡稱甲方）、受贈人（以下簡稱乙方），雙方就贈與圖書事宜訂本合同，其條件如下：

第一條 甲方將以下圖書贈與乙方： 全套 卷 冊 出版社發行

2全套 卷 冊 書店發行

第二條 甲方于 年 月 日前將上述圖書交付予乙方。

第三條 乙方將受贈的圖書陳設于乙方協會的閱覽室，并委托管理員，提供會員閱覽，保管費用由乙方負擔。

第四條 乙方若未能履約、或善盡保管的義務時，甲方可撤銷合同。

第五條 乙方如欲解散協會，則對所受贈圖書的處理須遵照甲方的指示。

本合同一式兩份，甲、乙雙方各執一份為憑。

贈與人（甲方）：

受贈人（乙方）：

年 月 日.

第五篇：補償貿易協議書

補償貿易協議書

中國________進出口公司(以下簡稱甲方)為一方，香港________公司(以下簡稱乙方)為一方，為發展________省的________業務，經雙方友好協商，一致同意按照下列條款達成補償貿易協議。

第一條甲方雙方的義務

(1)乙方負責向甲方提供________生產設備________臺(套)，其中包括相應的乙方原有的配套附屬設備和零部配件若干，以港元計價，合計價款________港元。

(2)甲方用________生產設備生產的________產品償還乙方設備的價款。

(3)乙方有義務接受________產品。以港元計價，每年接受________產品的價值額占________生產設備價款的

1/5，即________港元。乙方交付的設備和甲方交付的產品的價格、質量標準、具體交貨安排，由雙方另外簽訂補償貿易設備進口合同和返銷合同。

從乙方接受甲方________產品的第一年算起，整個補償期限是5年，20________年____月____日以前完成。

(4)甲、乙雙方協定在補償期滿后，乙方仍同意甲方每年繼續向其提供________金額的________產品。________產品的出口價格和計價貨幣由雙方重新協商。

第二條支付方式

(5)乙方將________生產設備裝運發貨后，甲方使用銀行貸款現匯支付乙方________生產設備的全部貨款。具體做法是：甲方與乙方所在地的________銀行簽訂貸款協定，乙方的________銀行向甲方提供進口________生產設備的商業銀行貸款________港元，年利率為________，以365天為1年，利息計算以銀行將貸款匯出日算起。

(6)甲方以每批交付商品所得的貨款，電匯或信匯乙方香港________銀行，由該行按合同規定的還款計劃逐批沖賬抵消，直至全部付清為止。在支付中甲方通過中國銀行________分行書具以乙方為受益人、金額為提供設備總價款100%的不可撤銷保證函一份。乙方通過香港________銀行書具以甲方為受益人、金額為產品總價款的不可撤銷的保證函一份。

第三條保證、賠償與罰款

(7)乙方提供的設備如有缺陷，甲方在設備到貨后1年內以書面形式通知乙方。乙方保證設備品質符合乙方的規格說明。

甲方：_____________________

(簽章)

_______年_______月_______日

乙方：_____________________

(簽章)

_______年_______月_______日