第一篇：制 程 稽 核 準 則(中英文對照版)

PROCESS AUDIT GUIDELINES

制 程 稽 核 準 則

SUGGESTED CONTENT包含的內容

WORK INSTRUCTIONS作業指導書

Available at each process step 每個步驟是否被執行

Work Instruction under revision control and at current revision level 作業指導書是否有版本管制及當前版本。

Calls out current production part number and revision level 有沒有注明產品編號及版本。

Calls out direct materials P/N, description, usage, and designator

有無直接羅列所用材料料號，規格，用量，點位。

Calls out operation machine name & station number, machine program name & revision, fixtures name/part number & revision 有無機器名稱/編號，機器程序名/版本，治具名/編號/版本。

Call out tools/gages with part number or name, indirect materials with detailed description, and their working conditions 有無羅列所用工具及計量器名稱或編號，以及用到的間接材料（如膠，錫絲）有無具體說明，包括他們工作條件。

Calls out work process/instruction for the station 每一站有無羅列作業步驟及作業指導。

Call out highlights/special notes for the operation 在作業指導書中有沒有對相關注意事項做重點標識。

OPERATOR作業員

Is operator certified for operation 作業員是否有受過相關作業資格培訓

If operator is in training, verify adequate supervision 在訓新員工上線是否有人做足夠的監督檢查 Ongoing program for re-certification of operators 對作業員是否有再認證計劃.Is operation staffed per Work Instructions 作業指導書是否規定各操作負責人員.Is operation being performed per Work Instructions 作業指導書上規定的操作是否都被執行.Is the operator monitored for his/her performance 作業員的績效是否被考核 MATERIALS材料

Production materials for each operation specified in Work Instructions and under AVL control 作業指導書是否有羅列出每站所需用到的生產材料, 并列入管制.Verify production materials are revision controlled & current 檢查生產材料是否有版本管制及目前版本狀況

Handling & storage guidelines called out in Work Instruction 作業指導書中是否定義材料處理&存儲辦法.Compliance with handling & storage guidelines documented 材料處理&存儲辦法是否被有效執行

Scrap and nonconforming material is isolated from normal production 廢料和不良品是否與良品隔離

Material preparation operations documented and controlled 備料動作有無文件說明并被控制 Controlled by an effective FIFO system 是否有一個有效的先進先出的系統,并被執行 Verify traceability of materials 驗證材料的可追溯性

Self audit system to ensure correct material usage 有無自檢系統以確保材料的正確使用

Materials are clearly marked/identified on line and storage area 在產線上及存儲區的材料是否有清楚的鑒別標識

EQUIPMENT / TOOLING / FIXTURES儀器/工具/治具

Calibration校準

Preventive maintenance(PM)records and schedules, maintenance log 預防保養履歷記錄,時間表,保養日志

Hour log maintained between PM’s, replacement, etc.預防保養，更換等有無做時間記錄，按小時數實施

Tooling & fixtures identified by part number and revision

工治具編號與版本

Operating procedure available at each operation 是否有對應于每一操作的作業程序

Cycle count management / hour log for tooling 對工具模具有無做周期循環/小時數管理

ECO/ECN tracking 工程變更單/工程變更通知跟蹤

Machine & tool capability studies performed and on file 是否完成儀器工具性能研究并保存相關文件

ESD CONTROL(IF APPLICABLE)靜電管制(如 可適用)

Training records for all personnel 對所有相關人員的培訓記錄 Daily test logs in place 現場測試日?qǐng)?bào)

All ESD systems in good working order and are properly installed and maintained

所有正?？刂频撵o電系統是否被恰當?shù)匕惭b并保養維護

ESD earth ground rod is checked for grounding impedance and recorded on annual basis 是否每年檢查ESD接地棒對地阻抗并記錄

ESD grounding main system is checked for grounding impedance and recorded on monthly basis 是否每月檢測ESD接地系統對地阻抗并記錄

Instrument/fixtures/benches are checked for grounding impedance and recorded on weekly basis 是否每周檢測并記錄儀器設備/治具/椅子等對地阻抗

Wrist/heel strip, and/or conductive shoes are checked and recorded by shift 是否每班檢測并記錄靜電手環或傳導鞋。

Wireless wrist strip is not allowed unless used with ionic blower and conductive floor 無線手環是不被允許的，除非在離子吹風機和傳導地板環境中使用

All semiconductor materials are in ESD free container, package or bin when/during storage, transfer, and handling 所有半導體材料在存儲，運輸及搬運中必須用防靜電容器，防靜電袋等進行靜電防護。People, semiconductor materials, machines, instrument, tools, fixtures, and working benches at ESD sensitive operation stations are grounded 在靜電敏感站的人員，半導體材料，機器，工具，治具及工作桌椅必須接地。

QUALITY CONTROL品質控制

Effective SPC in place and closed loop corrective action is taken when out-of-control occurs 現場是否有做有效的SPC管制，當超出管制點時是否做CLCA。Control limits of control chart are reviewed on monthly basis 是否每月審查管制圖之上下限

Effective Continuous Improvement Process(CIP)in place 現場是否實施有效持續改進過程

Quality acceptance/rejection criteria established for each process step 每段制程是否建立允收/拒收標準

Effective quality inspection and measurement capability in place at each inspection station 在每一個檢驗站是否有進行有效的品質檢驗與測量

Evidence that operators receive quality feedback and are responsible for the quality of their work 是否保證作業員可收到品質反饋并改進他們作業品質。Self audit system in place and effective 是否有自我稽核系統并有效實施

PRODUCTION PROCESS / FLOW生產制程/流程

Does layout prevent misrouting of product and minimize handling 線體設置是否能保證制程順暢（產品不滯流）以達成最少的人工處理。Evaluate physical layout for proper line balance and potential bottlenecks 線體規劃有無對其平衡及潛在瓶頸進行評估 Is flow of defective product documented 是否有文件定義不良品的處理流程

Is line stop criteria documented and enforced to prevent excessive buildup of defective

product 是否有文件定義停線標準以強迫防止生產額外不良品 Is customer’s process flow documented 是否文件化客戶制程流程

TEST PROCESS測試過程

Verify that test process is documented 檢查測試步驟方法是否文件化

Is test equipment and software under revision control 是否有對測試儀器與軟件進行版本管制

Test yield and defect data collection system exists, is automated and collects all data 現有的測試單元及不良數據收集系統是否是自動化以及是否能夠收集到所有數據 Feedback to the defect source from test yields and defect data for improvement 測試區域是否能及時反饋不良以加以改善

Test process and production flow prevents test escapes or misrouting of product 測試過程以及生產流程是否可以防止測試漏失及保證生產順暢

FAILURE ANALYSIS PROCESS不良分析過程

Is process documented 該制程是否文件化

Are production materials and repair materials effectively controlled to prevent misrouting or wrong parts being used 對生產及維修材料進行有效地控制以防止用錯料。

Are there proper skills, training, and equipment to support failure analysis 是否有適當?shù)募记桑嘤?xùn)及設備支持不良分析

Age and quantity of debug WIP is controlled 是否對調試工具的使用年限及數量進行控制。

Effective method to prioritize debug activities 使用有效的方法對調試動作優先順序進行區分

Failure analysis output drives corrective actions 是否能從不良分析之結果得出改善措施

Failure analysis data communicated to 客戶 on regular basis 是否能定期將不良分析數據傳送給客戶

Process in place to verify effectiveness of FA and corrective actions 是否有適當?shù)倪^(guò)程來驗證不良分析及改善措施的有效性

Process in place to evaluate No Fault Found defects(also CND – Can Not Duplicate)使用適當?shù)姆椒ㄔu(píng)估no fault found不良。? Rework Process rework過程

Procedures for each type of rework operation 確定每種類型返工的流程

Proper tools in place to rework all production materials and components used 在適當?shù)胤街惺褂眠m當工具rework所有的制造材料和元件

Data collection for all rework performed 收集所有rework數據

Data collection automated / filing computerized

數據收集自動化 / 用計算機進行整理 Data feedback to defect source 將數據反饋到不良源中心

Accept/reject criteria defined and available at rework station 對接收/拒收標準進行定義以及是否可以應用于Rework站 Verification of rework quality 驗證rework質量

Documented process flow for rework operations 對rework操作的流程進行文件化

Reworked material marked(physical marking or computer scan)對已rework材料進行標注(對其本身進行標注或計算機掃描)Rework history available for all reworked materials 將所有rework材料列入可用的rework檔案

Reworked materials go through proper test and inspection re-flow channel 對已rework材料進行適當?shù)臏y(cè)試及回流檢驗

PACKAGING / SHIPPING PROCESS 包裝/出貨過程

Procedure in place at packaging and shipping station 在包裝及出貨站是否有適當?shù)牧鞒?Procedures are part number specific 該流程是否區分不同的料號

Procedures comply with customer’s Packaging and Shipping spec 該流程應與客戶包裝與出貨規格一致。

RMA PROCESS FOR RETURNED MATERIAL 對于退回材料的RMA過程

RMA process documented RMA過程是否文件化

RMA test process flow documented RMA測試流程是否文件化

System in place to keep line and field returns segregated 是否有適當?shù)南到y(tǒng)將產線與市場返回品進行隔離 Closed loop corrective action process in place 是否有適當?shù)腃LCA流程

Minimum shippable revision level control and marking system in place 是否有適當?shù)淖钚⊙b載版本水平控制及標識系統 Data collection for all rework performed 對所有Rework過程的數據進行收集 Data collection filing computerized 使用計算機對收集的數據進行處理 Data feedback to defect source 將數據反饋到不良源中心

第二篇：中英文對照A

《美國口語慣用法例句集粹》Ａ

A(Page 1-4)

1.about

1)

2)

3)

4)

5)

6)

7)I'd like to know what this is all about.我想知道這到底是怎么回事。How about a fish sandwich? 來一塊魚肉三明治怎么樣？What about me? 我怎么樣？I'm not about to go in that old house.我是不會進那幢舊房子的！Yes I remember that night.What about it? 是的，我記得那個晚上，那又怎樣？What's this all about? 這到底是怎么回事？It's about time you showed up!差不多是你該露面的時候了。

2.above

1)

2)Above all, I want everything quiet.首要的是：我要一切保持安定。Tom thinks he's above hard work.湯姆認為自己沒必要努力工作。

3.act

1)

2)

3)

4)

5)

6)Would you please act out what happened? 你能把發生的事演示一下嗎？Watch Ricky.He sometimes likes to act up in class.注意里基，他又是喜歡在課堂上搗蛋。That profane comedian needs to clean up his act.那個愛說粗言穢語的喜劇演員應該凈化一下自己的言行。We need to get our act together and come to see you.我們需要統一意見后來見你。The newspapers called the earthquake an act of God.報紙上稱那次地震為天災。Masa is a class act.瑪莎是位杰出的女性。

4.action

1)

2)

3)

4)We're going to bring action against our debtors.我們打算控告我們的債務人。Did you see any action in yesterday's ballgame? 昨晚的棒球比賽中你看到有什么有趣的精彩場面嗎？Our community is going to take action against the proposed waste dump.我地區要采取行動反對那項垃圾處理場的提案。Jim wants to go where the action is.吉姆想去有刺激性的地方。

5.advantage

1)

2)Our opponents have a height advantage on us.我們的對手在身高上比我們占有優勢。Nobody likes to be taken advantage of.沒有人喜歡被捉弄（或：被欺騙、利用）

6.after

1)

2)

3)

4)I think that girl is after you.我想那女孩是在追你。It looks like things are gonna work out after all.看起來事情終會解決的。This soft drink has a nasty aftertaste.這軟飲料有種讓人難受的余味。I see your point, but don't you think it's way after the fact.我明白你的意思，但你不覺

得這已是“事后諸葛亮”了嗎？

7.again

1)I could go to Japan again and again.我可以一而再、再而三地去日本。（注：意指不會感到

厭倦）

8.age

1)

2)Would you please act your age!請你做事要有一個與自己年齡相稱的樣子。This is a “coming of age” movie.這是一部成人影片。

9.air

1)

2)

3)

4)

5)

6)

7)

8)

9)I need to go outside and get some air.我需要出去呼吸點新鮮空氣。I don't know what's wrong, but can feel it in the air.雖然我不知道到底是出了什么差錯，但我能隱隱約約感覺到。Mike was sad when they took his favorite program off the air.當邁克喜歡的節目被取消時，他感到很傷心。The sale of our house is still up in the air.我們的房子出勤率售一事還沒有最后定下來。After winning the championship, I felt I could walk on air.獲得冠軍后，我飄飄欲仙。Your sister is such an airhead.你姐姐真是來個沒有頭腦的人。Janet Jackson's new song is getting lots of airplay.珍妮〃杰克遜的新歌到處都在不斷地播放。That last time I took a plane, I got airsick.上次我乘飛機時暈機了。I hope there's no bad air between us.我希望我們之間的關系不要很別扭。

10.all

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

11)

12)

13)It's looks like we won't be going after all.看起來最后我們還是不能去。We've all but finished the project.我們已幾乎完成了那個項目。All in all I'd say it's been a very productive day.總的來說，我認為這一天過得很充實。Let's go all-out and win this game!讓我們盡全力來打贏這場比賽。We knew it was all over when we saw the building burst.當我們看見那座建筑突然起火時，我們知道一切全完了。We wish you all the best.我們大家祝福你一切如意。If it's all the same to you, I'd just as soon not go.如果這對你都是一回事的話，我就不想去了。They were running from the police like all get-out.他們以極快的速度逃脫警察的追趕。I didn't see them come in at all.我根本高沒有發現他們的進來。Let's settle this matter once and for all.讓我們來把這個問題一次性地徹底解決掉。Mark is an all-around athlete.馬克是一個全能運動員。Did you get to play in the all-star game? 你入選全明星隊的比賽了嗎？He bloke the all-time record in the 100-meter run at his school.他打破了他所在的學校

100米跑的歷史最高記錄。

11.alley

1)Working on cars isn't up my alley.修理汽車不是我拿手的活兒。

12.alone

1)

2)I just wanna be left alone.我只是想一個人呆會兒。Can't you just leave well enough alone? 你不能少管一些閑事嗎？

13.along

1)

2)You knew all along what was going on.你從一開始就知道所發生的事。Debbie doesn't get along with Steve.戴比和史蒂夫相處得不好。

1)

2)

3)

4)

5)Mr.Pak came here searching for the American dream.帕克先生來到這兒尋求他的“美國夢”。Some foreigners become Americanized while living in the U.S.一些外國人在美國居住時被美國化了。Not having any job freedom would be totally unAmerican.沒有選擇職業的自由是完全違背美國精神傳統的。Bill is an all-American quarterback.比爾是全美（橄欖球）明星賽的四分衛隊員。I just can't go on the American way.我無法適應美國方式。

15.animal

1)

2)Water-skiing really brings out the animal in Tom.滑水運動真正激發出了湯姆的活力與激情。The young actor emits a lot of animal magnetism on the screen.那個年輕演員在熒幕

上充分顯示出他的性魅力。

16.answer

1)I called Emi but there was no answer.我給埃米打了電話，但是沒人接。

17.apple

1)

2)

3)

4)

5)Have you ever been to the Big Apple? 你去過紐約嗎？Do I sense an apple of discord between you two? 你問我有沒有感覺出你們兩人之間的不和，是嗎？Heather is the apple of my eye.希瑟是我的掌上明珠。Rita likes to keep everything in apple-pie order.麗塔喜歡把一切都弄得井井有條。Dennis has always been an apple polisher.丹尼斯一直就是一個馬屁精。

18.arm

1)

2)

3)

4)You don't have to twist my arm to get me to go with you.用不著你強迫我跟你走。My father is a hopeless armchair quarterback.我爸爸是一個沒救了的紙上談兵的人。The suspects are armed and dangerous.嫌疑犯帶有武器，十分危險。Every spring the park is filled with lovers walking arm in arm.每到春天公園里到處都是

手挽手散步的戀人。

19.around

1)

2)Coach Johnson has been around for 30 years.約翰遜教練已有三十年的經驗了。Someone is on duty here around-the-clock.有人在這里晝夜值班。

20.as

1)

2)

3)

4)

5)

6)It looks as if someone has already been here.看起來在人來過這里了。As for me, I'm going home.至于我，我準備回家。Marty is acting as if nothing happened.馬蒂表現得像什么也沒發生過一樣。I want this room left as is.我希望這間房子保持原樣。The changes will begin taking place as of tomorrow.變動從明天開始實施。Police are baffled as to the whereabouts of the kidnappers.警察局搜尋綁架者的工作受

挫。

1)

2)

3)

4)Our gas bill average about $50 a month.我們每個月的煤氣費平均50美元。On the average, I'd say we eat chicken once a week.我們平均每周吃一次雞肉。Kent describes himself as just an average Joe.肯特視自己為一名普通的美國人。On the average day, over 100,000 kids bring guns to school in the U.S.在美國平常日

子里，有100,000個孩子帶手槍去上學。

22.away

1)

2)

3)

4)

5)What makes you think you're gonna get away with this? 是什么使你認為你可以免受處罰？I wish they'd do away with these complicated tax forms.我希望他們能費除掉這些復雜的稅務表格。We're planning a weekend getaway for our anniversary.我們正在為慶祝我們的紀念日而安排一次周末的外出活動。Tom wants to run away from home.湯姆想從家里出逃。Dave and Kathy are going to steal away on vacation.戴夫和凱茜計劃在假期里偷偷跑出

去。

第三篇：中英文對照

AEROFLEX “亞羅弗”保溫 ALCO “艾科”自控 Alerton 雅利頓空調 Alfa laval阿法拉伐換熱器 ARMSTRONG “阿姆斯壯”保溫 AUX 奧克斯

BELIMO 瑞士“搏力謀”閥門 BERONOR西班牙“北諾爾”電加熱器 BILTUR 意大利“百得”燃燒器 BOSIC “柏誠”自控 BROAD 遠大

Burnham美國“博恩漢”鍋爐 CALPEDA意大利“科沛達”水泵 CARLY 法國“嘉利”制冷配件 Carrier 開利 Chigo 志高

Cipriani 意大利斯普萊力

CLIMAVENETA意大利“克萊門特” Copeland“谷輪”壓縮機 CYRUS意大利”賽諾思”自控 DAIKIN 大金空調

丹佛斯自控 Dorin “多菱”壓縮機

DUNHAM-BUSH 頓漢布什空調制冷 DuPont美國“杜邦”制冷劑 Dwyer 美國德威爾 EBM “依必安”風機

ELIWELL意大利“伊力威”自控 Enfinilan 英國“英菲尼蘭“閥門 EVAPCO美國“益美高”冷卻設備 EVERY CONTROL意大利“美控” Erie 怡日

FRASCOLD 意大利“富士豪”壓縮機 FRICO瑞典“弗瑞克”空氣幕 FUJI “富士”變頻器

FULTON 美國“富爾頓”鍋爐 GENUIN “正野”風機 GREE 格力

GREENCOOL格林柯?tīng)?GRUNDFOS “格蘭富”水泵 Haier 海爾 Hisense 海信 HITACHI 日立

霍尼韋爾自控 Johnson 江森自控 Kelon 科龍

KRUGER瑞士“科祿格”風機 KU BA德國“庫寶”冷風機 Liang Chi 良機冷卻塔 LIEBERT 力博特空調 MARLEY “馬利”冷卻塔 Maneurop法國“美優樂”壓縮機 McQuary 麥克維爾 Midea 美的 MITSUBISHI三菱

Munters 瑞典“蒙特”除濕機 Panasonic 松下 RANCO “宏高”自控

REFCOMP意大利“萊富康”壓縮機 RIDGID 美國“里奇”工具 RUUD美國“路德”空調 RYODEN “菱電”冷卻塔 SanKen “三墾”變頻器 Samsung 三星 SANYO 三洋

ASWELL英國森威爾自控 Schneider 施耐德電氣 SenseAir 瑞典“森爾”傳感器 SIEMENS 西門子

SINKO ",28商機網;新晃“空調 SINRO “新菱”冷卻塔 STAND “思探得”加濕器 SWEP 舒瑞普換熱器 TECKA “臺佳”空調 Tecumseh“泰康”壓縮機 TRANE 特靈

TROX德國“妥思”風閥 VASALA芬蘭“維薩拉”傳感器 WILO德國“威樂”水泵 WITTLER 德國”威特”閥門 YORK 約克

ZENNER德國“真蘭”計量

第四篇：中英文對照

醫院中英文對照

發熱門診Have Fever主治醫師Doctor-in-charge 供應室Supply Room謝絕入內No entering 紅燈亮?xí)r謝絕入內No entering when red light

彩超、心電圖Colorful Cardiogram/ECG住院樓Inpatient Building 透析血磁EndoscopeDept.護士Nueser康復理療科RehabilitationPhysiotherapyDept.中藥計價China medical price account肛腸科Ano-proctology

皮膚、肛腸、男性科、泌尿科候診Dermatology、Ano-proctology、male Urology Clinic 皮膚科、肛腸科、男性科、泌尿科Dermatology、Ano-proctology、male Urology Dept 中醫科Traditional Chinese Medicine五官科ENT Dept.男性科、泌尿科 Male urology Dept.安全出口Exit

預防保健科Medical center for health preventionand care

后勤科、藥庫Logistic Room、Seore入院登記In-patient Admisson 高壓氧治療Hyperbaric Oxygehation Therapy碎石中心ESWL Center 急救中心Emergency Center掛號收費Registration

中心藥房Cenreral Pharmacy內科門診Internal Medicine Clinic會議室Meeting Room手外科Hand Surgery 產科Obstentrics Dept.骨外科Orthopedics Dept.神經、燒傷外科Neurosurgery.Plaseric surgey Dept.麻醉科Anaesthesiology手術室Operation Room 泌尿、腫瘤外科Urologic.Gumorsurgery Dept.婦科Gynecology Dept.內二科Internal Medicine.Ward 2產房及愛嬰中心Delivery Room內一科Internal Medicine.Ward 1洗手間Toilet

普外、胸外科Surgey、Thoracic Surgey Dept.皮膚科Dermatology Dept.中醫骨傷科Traditional Mediaine or Thopaedics餐廳Dining Room 配餐室Pantry Room后勤科Logistics Dept.電工室Electrician Room接待室Dermatology Room 內、兒科候診 Internal medicine.Pediatrics功能檢查候診Function Exam 中醫科候診TCM Clinic放射科候診Radiology Clinic 婦科門診Gynecology Dept.產科候診Obstentrics Clinic 肛腸科候診Ano-proctology婦科候診Gynecology Clinic 產科門診Obstentrics Dept.五官科候診ENT.Clinic 外科候診Surgery Clinic輸液中心Transfusion Center 皮膚、泌尿科候診 Dermatology.Male Urology Clinic檢驗候診Clinical Laborotories 家屬休息Relation Rest Room口腔科門診Stomatology Clinic 內兒科Internal Medicine.Pediaarics鏡檢科Endoscope Dept.外科Surgrey Dept.檢驗中心Laboratory Center 功能檢查Function Exam Dept.登記處Registration 預防保健門診Hygine ＆ Public Health Dept.收費處Cashier 美容科、鏡檢科門診 Cosmetology Dept.Endoscope Clinic

收費健康發證Gharge lssue Bill of Health試敏觀察室Scratch Espial Room

第五篇：中英文對照

共軌技術

隨著人們對低油耗、低廢氣排放、發動機低噪聲的需求越來越大，對發動機和燃油噴射系統的要求也越來也高。對柴油發動機燃油噴射系統提出的要求也在不斷增加。更高的壓力、更快的開關時間，以及根據發動機工況修訂的可變的流量速率曲線，已經使得柴油發動機具有良好的經濟性、低污染、高動力性，因此柴油發動機甚至進入了豪華高性能轎車領域。達到這些需求的前提是擁有一個可以精確霧化燃油并具有高噴油壓力的燃油噴射系統。同時，噴油量必須精確計算，燃油流量速率曲線必須有精確的計算模型，預噴射和二次噴射必須能夠完成。一個可以達到以上需求的系統即共軌燃油噴射系統。

共軌系統包括以下幾個主要的部分： ①低壓部分，包含燃油共軌系統組件。

②高壓系統，包含高壓泵、油軌、噴油器和高壓油管等組件。

電控柴油機系統EDC主要由系統模塊，如傳感器、電子控制單元和執行機構組成。共軌系統的主要部分即噴油器。它們擁有一個可以快速開關噴嘴的執行閥(電磁閥或壓電觸發器)，這就允許對每個氣缸的噴射進行控制。

所有的噴油器都由一個共同的油軌提供燃油，這就是“共軌”的由來。在共軌燃油噴射系統中，燃油噴射和壓力的產生是分開的。噴油壓力的產生與發動機轉速和噴油量無關。EDC控制每個組件。

(1)壓力產生。

燃油噴射和壓力的產生是通過蓄能器分離開來。將具有壓力的燃油提供給為噴射做好準備的共軌系統的蓄能器。

由發動機驅動的連續運轉的高壓泵提供所需噴油的壓力。無論發動機的轉速高低，還是燃油噴射量的多少，油軌中的壓力均維持在一定值。由于幾乎一致的噴油方式，高壓泵的設計可以小的多，而且它的驅動轉矩可以比傳統燃油噴射系統低，這源于高壓泵的負載很小。

高壓泵是徑向活塞泵，在商用車上有時會使用內嵌式噴油泵。(2)壓力控制

所應用的壓力控制方法主要取決于系統。

一種控制油軌壓力的方式是通過一個壓力控制閥對高壓側進行控制。不需噴射的燃油通過壓力控制閥流回到低壓回路。這種控制回路允許油軌壓力對不同工況(如負載變化時)迅速做出反應。

在第一批共軌系統中采用了對高壓側的控制。壓力控制閥安裝在燃油軌道上更可取，但是在一些應用中，它被直接安裝在高壓泵中。

另一種控制軌道壓力的方式是進口端控制燃油供給。安裝在高壓泵的法蘭上的計量單元保證了泵提供給油軌精確的燃油量，以維持系統所需要的噴油壓力。

發生故障時，壓力安全閥防止油軌壓力超過最大值。

在進口端對燃油供給的控制減少了高壓燃油的用量，降低了泵的輸入功率。這對燃油消耗起到積極的作用。同時，流回油箱的燃油溫度與傳統高壓側控制的方法相比得到了降低。

雙執行器系統也是一種控制軌道壓力的方式，它通過計算單元對壓力進行控制，并且通過壓力控制閥對高壓端進行控制，因此同時具備高壓側控制與進口端燃料供給控制的優勢。

(3)燃油噴射

噴油器直接將燃料噴到發動機的燃燒室。它們由與燃油軌道直接相連的短高壓油軌提供燃油。發動機的控制單元通過與噴油器結合在一起的控制閥的開閉控制噴油嘴的開關。

噴油器的開啟時間和系統油壓決定了燃油供給量。在恒壓狀態下，燃油供給量與電磁閥的開啟時間成正比，因此與發動機或油泵的轉速(以時間為計量的燃油噴射)無關。

(4)液壓輔助動力

與傳統燃油噴射系統相比，將壓力的產生與燃油的噴射分離開來，有利于燃燒室的充分燃燒。燃油噴射壓力在系統中基本可以自主選擇。目前最高燃油壓力為1600巴，將來會達到1800巴。

共軌系統通過引入預噴射或多次噴射可以進一步減少?gòu)U氣排放，也能明顯降低燃燒噪聲。通過多次觸發高速轉換閥的開閉可以在每個噴射周期內實現多達5次的噴射。噴油針閥的開閉動作是液壓輔助元件助力的，以保證噴射結束的快速性。

(5)控制和調節

發動機的控制單元通過傳感器檢測加速踏板的位置以及發動機和車輛的當前工況。采集到的數據包括：

① 曲軸轉速和轉角； ② 燃油軌道的壓力； ③ 進氣壓力；

④ 進氣溫度、冷卻液溫度和燃油溫度； ⑤ 進氣量； ⑥ 車速等。

電控單元處理輸入信號。與燃燒同步，電控單元計算施加給壓力控制閥或計算模塊、噴油器和其他執行機構(如EGR閥，廢氣渦輪增壓器)的觸發信號。

噴油器的開關時間應很短，采用優化的高壓開關閥和專業的控制系統即可實現。

根據曲軸和凸輪軸傳感器的數據，對照發動機狀態(時間控制)，角度/時間系統調節噴油正時。電控柴油機系統(EDC)可以實現對燃油噴射量的精確計算。此外，EDC還擁有額外的功能以進一步提高發動機的響應特性和便利性。

其基本功能包括對柴油燃油噴射正時的精確控制，和在給定壓力下對油量的控制。這樣，它們就保證了柴油發動機具有能耗低、運行平穩的特點。

其他開環和閉環控制功能用于減少?gòu)U氣排放和燃油消耗，或提供附加的可靠性和便利性，具體例子有：

① 廢氣在循環控制； ② 增壓控制； ③ 巡航控制；

④ 電子防盜控制系統等。(6)控制單元結構。

由于發動機控制單元通常最多有8個噴油器輸出口，所以超過八缸的發動機需要兩個控制單元。它們通過內置高速CAN網絡的“主/從”接口進行連接，因此也擁有較高的微控制器處理能力。一些功能被 分配給某個特定的控制單元(如燃料平衡控制)，其功能根據需求情況(如檢測傳感器信號)可以動態地分配給一個或多個控制單元。

The Common Rail Calls for lower fuel consumption, reduced exhaust-gas emission, and quiet engines are making greater demands on the engine and fuel-injection system.The demands placed on diesel-engine fuel-injection systems are continuously increasing.Higher pressures, faster switching times, and a variable rate-of-discharge curve modified to the engine operating state have made the diesel engine economical, clean, and powerful.As a result, diesel engines have even entered the realm of luxury-performance sedans.These demands can only be met by a fuel-injection pressure.At the same time the injected fuel quantity must be very precisely metered, and the rate-of-discharge curve must have an exact shape, and pre-injection and secondary injection must be performable.A system that meets these demands is the common-rail fuel-injection system.The main advantage of the common-rail system is its ability to vary injection pressure and timing over a broad scale.This was achieved by separating pressure generation(in the high-pressure pump)from the fuel-injection system(injection).The rail here acts as a pressure accumulator.Principle of the Common Rail The common-rail system consists of the following main component groups: ① The low-pressure stage, comprising the fuel-supply system components;② The high-pressure system, comprising components such as the high-pressure pump, fuel-rail, injector, and high-pressure fuel lines.The electronic diesel control(EDC), consisting of system modules, such as sensors, the electronic control unit, and actuators.The key components of the common-rail system are the injectors.They are fitted with a rapid-action valve(solenoid valve or piezo-triggered actuator)which opens and closes the nozzle.This permits control of the injection process for each cylinder.All the injectors are fed by a common fuel rail, this being the origin of the term “common rail”.In the common-rail fuel-injection system, the function of pressure generation and fuel injection are separate.The injection pressure is generated independent of the engine speed and the injected fuel quantity.The electronic diesel control(EDC)controls each of the components.(1)Pressure Generation.Pressure generation and fuel injection are separated by means of an accumulator volume.Fuel under pressure is supplied to the accumulator volume of the common

rail ready for injection.A continuously operating high-pressure pump driven by the engine produces the desired injection pressure.Pressure in the fuel rail is maintained irrespective of engine speed or injected fuel quantity.Owing to the almost uniform injection pattern, the high-pressure pump design can be much smaller and its drive-system torque can be lower than conventional fuel-injection systems.This results in a much lower load on the pump drive.The high-pressure pump is a radial-piston pump.On commercial vehicles, an in-line fuel-injection pump is sometimes fitted.(2)Pressure Control The pressure control method applied is largely dependent on the system.One way of controlling rail pressure is to control the high-pressure side by a pressure-control valve.Fuel not required for injection flows back to the low-pressure circuit via the pressure-control valve.This type of control loop allows rail pressure to react rapidly to changes in operating point(e.g.in the event of load changes).Control on the high-pressure side was adopted on the first common-rail systems.The pressure-control valve is mounted preferably on the fuel rail.In some applications, however, it is mounted directly on the high-pressure pump.Another way of controlling rail pressure is to control fuel delivery on the suction side.The metering unit flanged on the high-pressure pump makes sure that the pump delivers exactly the right quantity of fuel rail in order to maintain the injection pressure required by the system.In a fault situation, the pressure-relief valve prevents rail pressure from exceeding a maximum.Fuel-delivery control on the suction side reduces the quantity of fuel under high pressure and lowers the power input of the pump.This has a positive impact on fuel consumption.At the same time, the temperature of the fuel flowing back to the fuel tank is reduced in contrast to the control method on the high-pressure side.The two-actuator system is also a way of controlling rail pressure, which combines pressure control on the suction side via the metering unit and control on the high-pressure side via the pressure-control valve, thus marrying the advantages of high-pressure-side control and suction-side fuel-delivery control.(3)Fuel Injection.The injectors spray fuel directly into the engine’s combustion chambers.They are supplied by short high-pressure fuel lines connected to the fuel rail.The engine control unit controls the switching valve integrated in the injector to open and close

the injector nozzle.The injector opening times and system pressure determine the quantity of fuel delivered.At a constant pressure, the fuel quantity delivered is proportional to the switching time of the solenoid valve.This is, therefore, independent of engine or pump speed(time-based fuel injection).(4)Potential Hydraulic Power.Separating the functions of pressure generation and fuel injection opens up future degrees of freedom in the combustion process compared with conventional fuel-injection systems;the injection pressure at pressure at present is 160 MPa;in future this will rise to 180 MPa.The common-rail system allows a future reduction in exhaust-gas emissions by introducing pre-injection events or multiple injection events and also attenuating combustion noise significantly.Multiple injection events of up to five per injection cycle can be generated by triggering the highly rapid-action switching valve several times.The nozzle-needle closing action is hydraulically assisted to ensure that the end of injection is rapid.(5)Control and Regulation.The engine control unit detects the accelerator-pedal position and the current operating states of the engine and vehicle by means of sensors.The data collected includes:

① Crankshaft speed and angle;② Fuel-rail pressure;③ Charge-air pressure:

④ Intake air, coolant temperature, and fuel temperature: ⑤ Air-mass intake: ⑥ Road speed, etc.The electronic control unit evaluates the input signals.In sync with combustion, it calculates the triggering signals for the pressure-control valve or the metering unit, the injectors, and the other actuators(e.g.the EGR valve, exhaust-gas turbocharger actuators, etc.).The injector switching times, which need to be short, are achievable using the optimized high-pressure switching valves and a special control system.The angle/time system compares injection timing, based on data from the crankshaft and camshaft sensors, with the engine state(time control).The electronic diesel control(EDC)permits a precise metering of the injected fuel quantity.In

addition, EDC offers the potential for additional functions that can improve engine response and convenience.The basic functions involve the precise control of diesel-fuel injection timing and fuel quantity at the reference pressure.In this way, they ensure that the diesel engine has low consumption and smooth running characteristics.Additional open-and close-loop control functions perform the tasks of reducing exhaust-gas emissions and fuel consumption, or providing added safely and convenience.Some examples are:

① Control of exhaust-gas recirculation;② Boost-pressure control;③ Cruise control;

④ Electronic immobilizer, etc.(6)Control Unit Configuration.As the engine control unit normally has a maximum of only eight output stages for the injectors, engines with more than eight cylinders are fitted with two engine control units.They are coupled within the “ master/slave ” network via an internal, high-speed CAN interface.As a result, there is also a high microcontroller processing capacity available.Some functions are permanently allocated to a specific control unit(e.g.fuel-balancing control).Other can be dynamically allocated to one or many of the control units as situation demand(e.g.to detect sensor signals).