第一篇：鉆井工程師崗位職責

鉆井工程師崗位職責

1、鉆井工程師崗位職責

1、鉆井工程師是鉆井隊技術負責人，工作上對平臺經理負責。

2、鉆井工程師負責督促、落實、嚴格執行鉆井監督的指令，和監督保持密切聯系，有問題及時和監督進行協商。

3、鉆井工程師負責常規技術措施的制定，保證正常作業施工時設備和井下安全。

4、鉆井工程師負責在項目經理的領導下，妥善處理和甲方及第三方的關系。

5、鉆井工程師負責井控工作和井控設備的管理。

6、鉆井工程師負責鉆井參數儀的維護管理。

7、鉆井工程師負責測斜工具的維護管理。

8、鉆井工程師負責鉆具、管具和各種井下工具的管理。

9、鉆井工程師負責計算機的使用與維護。

10、鉆井工程師負責資料的收集整理、報表填寫和資料處理。

2、鉆井隊工程師崗位職責

l、負責貫徹執行技術政策、措施及上級技術指令，搞好井隊技術管理。

2、根據鉆井設計書，詳細制定施工方案和具體的技術措施。

3、負責設備安裝質量的檢查，確保安裝質量。

4、負責搞好“四大管理”(泥漿、鉆具、鉆頭、設備)管好用好指重表和測斜儀。做好下井各種鉆具、套管、工具的檢查、丈量和記錄工作。打撈工具和特殊工具要繪制草圖，注明尺寸。

5、負責組織各項重大工程和特殊作業的施工準備與檢查，處理井下復雜情況及井下事故。

6、審查工程報表，填寫井史，收集整理各項工程技術資料報表，做好月技術經濟指標分析和完井總結，按時上報。

7、掌握鉆井動態，負責每日向上級生產部門匯報當日生產技術工作情況。

3、鉆井工程師崗位職責

1、負責鉆井隊技術、工程資料、新技術及新工藝的推廣與應用、技術培訓、鉆井工程質量工作。

2、負責鉆井隊技術管理，保證甲方和工程技術部門各項技術指令和安全技術措施的貫徹落實，并負責鉆井技術交底工作。

3、根據甲方下達的地質、工程設計書，負責制定施工計劃和技術措施。

4、負責鉆具、鉆頭的管理，鉆井參數儀、自動記錄儀、測斜儀的使用、檢查及維護，參與設備安裝質量的檢查、校正和驗收工作。

5、負責組織各項重大工程和特殊作業的施工、準備與檢查，處理井下復雜情況和井下事故，制定技術措施和要求，并負責各種特殊工具的草圖繪制和相關技術標準的實施。

6、負責鉆井隊技術培訓，組織和實施鉆井新技術、新工藝的推廣與應用；負責計算機管理。

7、負責鉆井施工質量控制，執行相關QHSE體系標準。

8、嚴格執行井控管理制度，負責組織現場井控設備的安裝、試壓、維護工作，負責現場防噴演習的組織和講評工作。

9、負責審查工程班報表，填寫井史，收集、整理、保管各項工程技術資料并按時上報；嚴格執行每日匯報制度。

第二篇：鉆井工程師崗位責任制

鉆井工程師崗位責任制

1、鉆井工程師是鉆井隊技術負責人，工作上對平臺經理負責。

2、鉆井工程師負責督促、落實、嚴格執行鉆井監督的指令，和監督保持密切聯系，有問題及時和監督進行協商。

3、鉆井工程師負責常規技術措施的制定，保證正常作業施工時設備和井下安全。

4、鉆井工程師負責在項目經理的領導下，妥善處理和甲方及第三方的關系。

5、鉆井工程師負責井控工作和井控設備的管理。

6、鉆井工程師負責鉆井參數儀的維護管理。

7、鉆井工程師負責測斜工具的維護管理。

8、鉆井工程師負責鉆具、管具和各種井下工具的管理。

9、鉆井工程師負責計算機的使用與維護。

10、鉆井工程師負責資料的收集整理、報表填寫和資料處理。

第三篇：鉆井工程師崗位描述

鉆井工程師崗位責任制 Drilling engineer’s station-responsibility

（一）崗位責任制 Station-responsibility 1． 負責向平臺干部，職工貫徹工程設計，制訂與落實各階段的鉆井施工措施和參數，向鉆井領班下達每次作業技術指令。

1.Drilling engineer is responsible to give publicity to the well project design and formulate the measures and parameters of the drilling construction.2． 負責鉆頭的選型及使用分析，負責鉆具的管理及下井鉆具組合的選配。

2.Drilling engineer is responsible to choose the type of bit and bottom hole assemble and analyses the result of the bit’s application.3． 負責指重表、泵壓表以及各種工程儀表的使用與管理。

3.Drilling engineer is responsible to administrate and make use of drilling engineering instruments.4． 負責井控設備的定期檢查與試壓，監督落實井控措施的執行情況，定期組織井控演習。

4.Drilling engineer is responsible to check and have pressure test to well control equipment.Besides, Drilling engineer should organize the well control drill.5． 嚴把取芯、井身、固井3大質量關。

5.Drilling engineer is responsible to control the quality of the core hole and cementing 6． 負責新技術、新工藝的推廣與應用。

6.Drilling engineer is responsible to apply and spread the new technology and skill.7． 負責收集、整理、上報各種鉆井原始資料，負責填寫鉆井井史。

推

7.Drilling engineer is responsible to collect and put the original data in order and report it.Drilling engineer is responsible to compile well records.8． 搞好平臺鉆工的技術教育，以及每口井的技術交底工作。

8.Drilling engineer is in charge of drilling technology education and explanation to the floor man 9． 負責組織對工程事故調查處理，原因分析，制定預防措施，并向平臺經理提出處理意見，經平臺經理同意后向技術科匯報。

9.Drilling engineer is in charge of investigation of project accident and the analysis of reason, Drilling engineer is responsible to formulate the measure to prevention of the accident, and give the advice to manager.Report to technical department after the manger’s approval.10． 關鍵作業和復雜作業時必須到現場親自指揮，做到“五到平臺三值班”，即打隔水導管、下套管固井、裝井口、起下鉆“兩頭”、測斜、處理井下復雜情況必須到鉆臺，拖航、油層井段鉆進、試油射孔、求產放噴需堅持值班。

10.Drilling engineer must do as a director when a well occur complicate construction such as conductor drilling, BOP installing, tripping of initial stage, directional well data’s survey managing of the complicate situation.Drilling engineer should on duty during the towing, drilling of oil formation, well-test, perforating.11、參加平臺旬度檢查，對鉆井設備的事故隱患要及時組織整改。

11.Drilling engineer should take part in the checking of quarter of the year and certificates the potential problem for drilling equipment promptly.12、完成領導交辦的臨時工作；認真填寫“工作日志”。

12.Drilling engineer should the finish the job offered by the leader and fill the work log.（二）循回檢查線路 Checking route 值班房—綜合錄井房—鉆臺下—鉆具堆場—井控裝置—泥漿泵艙--循環系統—鉆臺上

Dog house-log house-drilling floor bottom-drilling pipe yard-well control equipment –mud circulating system

（三）檢查項點 Check points 值班房：工程班報表填寫工整，齊全；泥漿班報表填寫工整，及時。

Dog house: check the drilling and mud records filled correctly and promptly.綜合錄井房:地質巖性變化情況,鉆時快慢情況；錄井中油氣顯示井段及級別；鉆進中有無異常提示。Log house: observe the change of the character, the display of the oil and gas.鉆臺下：封井器固定牢靠，合乎標準要求；封井器及管線衛生良好，不漏油、漏泥漿。

Bottom of the drilling floor: check the BOP stack fixed firm or not, BOP and the control pipes is clean or not, and don’t leak the oil and mud.鉆臺上：

1、檢查鉆臺鉆桿立柱編號與錄井下井編號是否一致，對應井深與計算數據是否一致；

2、死繩固定牢靠，螺絲背帽齊全緊固，防跳螺絲齊全；

3、傳壓器固定良好，靈敏，管線不漏油，冬季用防凍液；

4、指重表、泵壓表、扭距表等司鉆操作臺儀表讀數準確；

5、了解井下情況，作業指令與鉆井參數是否匹配合理；

6、封井器司控臺儀表顯示正常，隨時可用；

7、節流、壓井控制臺儀表顯示正常，隨時可用。

8、檢查節流壓井管匯閘門開關位置是否正確，各閘門開關是否靈活。

Drilling floor: 1.Check the stand pipe’s number which is same to number of the log.2.Check the dead line block fixed well or not.3.The transformer fixed good, sensitive, not leak of the oil, antifreeze in winter;4.Weight indicator, pump pressure instrument, torque instrument are accuracy;5.Understand the down well condition, operating instructions and the drilling parameters match reasonably;6.Blowout preventer control station instrument display normally, available.7.Throttle, kill the console instrument display normal, ready for use.8.Check throttling kill manifold valve switch position is correct, all gate switch are flexible.井控裝置：

1、遠程控制臺衛生清潔、無油污；

2、液壓管線接頭緊固，不刺、不漏、試壓可靠；

3、電泵、氣泵工作正常；

4、控制臺、儀表齊全、充壓手柄完好，位置正確，各儀表壓力在要求范圍之內。

Well control equipment: 1.Remote control console cleanness without greasy dirty;2.Hydraulic pipeline joint fastening, no leakage, pressure test and reliable;3.Electric pump and air pump work condition;4.Control console and Instrument is complete, charging-the handle in good condition, correct position, the pressure in the instrument in the required range.鉆具堆場：

1、到平臺鉆具按種類不同合理擺放；

2、鉆具擺放排列整齊；

3、檢查鉆具絲扣清潔，水眼內無雜物；

4、備用、上下鉆臺鉆具絲扣戴好護絲；

5、不使用的鉆具分類打捆，以免誤下井。

Drilling pipe yard: 1.the drilling pipe arrange reasonably according to the different placement;2, drilling pipes are putted in order;3, check the drilling tool thread clean, no debris in the water hole;4, drilling tool thread should wear thread protector, when them need rise up and down the drilling floor;5, not used the tools should be bailed classifiably, in order to avoid mistake.循環系統：固控設備正常運轉；泥漿液面無異常變化泥漿流動性能良好；儲備倉，儲備足夠泥漿或重泥漿。

Mud circulates system: solid control equipment work well.mud tank surface no abnormal changes.Mud condition performance good;, reserve enough heavy mud or mud.四、崗位風險以及控制措施 Post risks and control measures

（一）崗位風險 Post risks

1、對井下情況調查不清，施工技術措施制定不當，影響施工質量，引發復雜情況和事故；

2、施工技術措施和工藝紀律執行不嚴，造成質量事故和工程事故；

3、進入油氣層、鉆遇復雜或高壓地層處置不及時或不當，可能發生井噴、井漏、卡鉆等工程事故和其他復雜情況；

1.To the underground investigation is not clear, improper construction technical measures, affect construction quality, the complex situation and accidents;2.Construction technical measures, execution and process discipline is lax caused quality accidents and accidents;3.Into the oil and gas layer, the drilling in complex or high pressure formation improper disposal time, may be a blowout, lost circulation and sticking engineering accidents and other complex situations;

（二）控制措施control measures

1、根據項目的地質設計提示，調查鄰井地質資料，對高壓油氣水層和可能含有H2S氣體的地層，提出安全施工措施，做好技術交底；

2、審查《鉆井施工設計》中預防井噴、預防H2S氣體的措施是否得當；

3、管理井控臺賬，保證井控設備完好，井控物資儲備充足；

4、掌握鉆具和井下情況，預防井噴和井下事故；

5、按照《HSE現場檢查表》規定，定期進行檢查；

6、嚴格執行鉆具管理制度，負責各種井下工具、鉆井工具、套管工具、打撈工具和接頭的檢查管理和丈量工作；

7、關鍵作業和復雜作業時必須到現場指揮，做到“五到鉆臺三值班”，即打隔水導管、下套管固井、裝井口、起下鉆“兩頭”、測斜、處理井下復雜情況必須到鉆臺，油層井段鉆進、試油射孔、求產放噴需堅持值班。

1.According to the project geological design tips, geological survey of adjacent well data, the high pressure oil and gas layer and formation that may contain H2S gas, safety construction measures are proposed, completes the technical disclosure;2.Review the drilling construction design, to prevent blowout, H2S gas prevention measures are appropriate;3, Manage well control parameter, to guarantee the well control equipment in good condition, well control supplies sufficient reserves;4.Master drilling tools and downhole condition, prevention of well blowout and downhole accidents;

五、應急責任

1、接到井口溢流報告，立即向經理報告，立即到現場，計算壓井?dāng)?shù)據，制定壓井方案，組織壓井；

2、發生硫化氫溢出時，立即帶好防毒面具，按防硫措施處理；

3、井噴失控，立即向應急集合點集合，等候下步措施；

4、熟悉各種應急情況下的報警信號，明確自己在各種應急情況下的崗位職責。Emergency duty 1, received a wellhead overflow report, immediately report to the manager, to the scene immediately, calculate pressure well data, work out schemes for the kill well, begin to skill the well;2, hydrogen sulfide overflow occurs, immediately take a mask, according to the sulfur measures;3, blowout out of control, immediately to the emergency assembly point set, waiting for the next step;4, familiar with all kinds of alarm signals under emergency situation, clear their responsibility in all kinds of emergency situations.

第四篇：鉆井工程師英文簡歷

CURRICULUM VITAE

Name：xxxx

Gender: Male

Date of Birth：May 13, 19XX

Nationality :Chinese

Education :Bachelor’s degree

Address : xxx(city),Hubei Province

Mobile:136XXXXXXXX

E-mail :

Spoken: Chinese, English

Written: Chinese, English

2002.7~2006.6xxxxx University

Major: Petroleum EngineeringBachelor degree 2009.9-2010.2

Place: Zhongyuan Oil field

Training organization: Training Center in Zhongyuan Oil field

Content: Drilling English and Spoken English

? Five years working experience：4 years Drilling engineer in government stated

company;half yearexperience in international foreign invest company;

? Experienced in designing equipment/material(bits and bottom hole assembly, rig

equipment, wellhead, BOP, etc)

? Experienced in resolving down hole problem

? Experienced in directional, horizontal and multilateral drilling(planning, designing)? Well leadership and team work, Good organization skills, mindful, accountable.2011.5– PresentBeijing xxxx Energy Ltd.Company brief introduce:The company is mainly for coal seam gas enterprises provide drillingtechnology services and solutions

Position:Drilling Engineer

Main responsibilities

? Daily drilling technology management, give technical instructions to each shift;?Responsible for drilling tools management;Reporting requirement plan about

drilling tools, such as bit, drill pipe, drill collar, inside bop etc;

? Responsible for well control technology management;

? Wellbore quality control;

? Drilling progress control;

? Cementing and wellhead installation;

? Responsible for collection of Drilling data and write drilling report and drilling history;? Control and resolving down hole problems

? Training employees;

2010.8 to 2011.2xxx Energy Ltd.Company brief introduce:The company is mainly for overseas oilfield enterprises provide petroleum technology services and solutions

Position: Wellbore data management(Drilling)Engineer

Main responsibilities

? Quality control；

? Carry out wellbore data analysis based on well operation history

? Screen the key data items from clients raw reports

? Check wellbore data integrity and consistence

? Responsible for data entry in database on time per clients formats and quality

standards

2006.07 to 2010.08xxxxx Drilling Company.Company brief introduces: Large state-owned oil company

Position： Drilling engineer

Main responsibilities

? Daily drilling technology management, give technical instructions to each shift;? Responsible for drilling technology measures for each spud in;

?Responsible for drilling tools management;Reporting requirement plan about

drilling tools, such as bit, drill pipe, drill collar, inside bop etc;

? Responsible for well control technology management and control equipment

installation and testing;

? Responsible for collection of Drilling data and fill in the daily report;

? Responsible for drilling instrumentation installation and maintenance, and other daily

management work;

? Responsible fordrilling completion report and drilling history;

? Responsible for employees drilling technique knowledge training;

第五篇：鉆井技術員崗位職責

鉆井技術員崗位職責

1、具體負責鉆井技術管理和安全教育工作；嚴格執行生產技術指令、操作規程、技術管理制度和安全條例。

2、組織實施鉆井施工設計并做好各次開鉆前得技術交底。

3、負責布置班作業計劃，確定鉆井參數，提出安全措施，并督促、檢查執行情況。

4、掌握井下情況，及時制定井下事故復雜情況的處理措施，并組織實施。

5、負責指重表、傳感器、自動記錄儀的安裝使用、維護保養。

6、負責井口裝置、鉆具、測斜儀、打撈工具以及配合接頭、鉆井工具的檢查驗收和管理，做好各環節中的協調工作。

7、負責審查鉆井班報、日報、月報，收集技術資料，整理編寫鉆井專報、井史和完鉆總結，并按規定及時上報。

8、參與制定隊安全、環保預防性措施及應急響應方案并組織演練。

9、隊長、副隊長不在時，代理其行使工作職責。

10、每日按上級規定的時間按時匯報生產情況。

11、檢查按巡回檢查路線及要點進行檢查。

巡回檢查路線

程控制臺/井口裝置/節流管匯/死繩固定器/循環系統、固控系統/泵房/防碰天車/鉆機/操作臺/井控司鉆臺/指重表、記錄儀、傳感器、鉆頭、回壓凡爾/井場（鉆具、接頭、備用工具）/值班室（值班表）。