第一篇：寫作英文論文的一些心得

【許 可按：我的朋友蘭小歡，系美國某大學經濟學專業博士候選人,。他發表在牛博網的這篇《寫作英文論文的一些心得》點擊率很高，在互聯網也廣為傳播，里面的大 部分觀點我都很同意，特別是文中反復出現的reader friendly的換位思考意識，更是我雅思作文課上多次強調的。轉載此文，相信不僅僅對已經在美國讀書的各位有所裨益，對那些正在準備托福雅思GRE作 文的同學的幫助也是大大地!】

寫作英文論文的一些心得

作者：蘭小歡

對經濟學新人來說，不管論文寫幾十頁，除了倒霉的匿名審稿人之外，沒人會花超過五分鐘去讀。那么合理的寫作策略就是最大程度的節省讀者的閱讀時間，最有效的傳遞信息。具體而言，我力圖達到以下目標：

1.如果讀者只有十秒鐘，他也應該清楚地知道我干了什么，主要結果是什么，用了什么數據，貢獻在哪里。

2.如果讀者有三十秒，他應該在得知以上信息的基礎上，知道我是這么論證的，并且能夠快速在三四十頁的論文中準確地找到他想讀的內容。

3.如果讀者有一分鐘，他應該能知道80%的論文內容，并且覺得似乎應該多花兩分鐘再看看。

4.如果讀者有三分鐘，他應該能準確地知道我在討論的這件事的來龍去脈，準確地知道我的方法我的假設。如果我是一個推銷員的話，我必須做到在三分鐘內把最重要的賣點都說清楚了，說好了，至于讀者買不買，那是另一回事了。

5.如果讀者是匿名審稿人，必須花幾十分鐘讀論文的話，那我要做到最小化他的閱讀負擔，別把他老人家惹毛了。

如何達到以上目標呢？我總結的心得散見于各位大牛給年輕人的寫作建議中，我只是把它們換成我的方式再表達出來。這些建議都寶貴，我讀過不少于十遍，寫作的時候更是隔三岔五拿出來對照一番，每次都有收獲。Mankiew收集的建議在這里，Blattman收集了另一些在這里。

一、如果讀者只有十秒，他只會讀ABSTRACT.這個東西極端重要，首先它是論文的第一段，讀者這時候注意力還集中著，腦子還轉著。一般而言，讀者在讀完三段以后注意力就散的差不多了，所以頭三板斧（段）很重要。其次它一般也是論文的最后一段，讀者讀完這段才決定是不是往下看，大部分時候就不繼續看了。所以ABSTRACT要把所有重要的內容表述出來，不能超過150字。對empirical的論文來說，這段要包括研究的問題，使用的數據，identification，和所有重要的估計結果，帶數字的。

有一回我把ABSTRACT寫到150字了，覺得巨滿意，簡潔得不行，簡直不能再多刪一個字。后來去投稿，學報要求必須在100字以內，而且是網絡提交，網頁的對話框是設定好的，一超過100字就變紅字，那是相當吝嗇.沒辦法，再重寫。刪啊刪的，硬是砍掉了50多字，居然也沒覺得損失什么內容?？梢娫?jīng)自鳴得意的簡介，如果再使勁兒逼一下，還是有三分之一多的水分。

要投出去的論文，不管是學報也好，JMP也好，應該盡量沒有因?yàn)閷懽鞫斐傻乃帧?/p>

二、如果讀者有30秒，他會在看完ABSTRACT之后迅速瀏覽論文的章節結構，這時候章節的標題怎么寫就很重要了。

原則是：章節的標題要傳遞信息，除了Introduction和Conclusions之外，所有的標題都應該有內容。

比如，如果一個章節叫“Data”，那就沒有內容。如果叫“Data: CPS 1990-2000”，這就是有內容。或者刪掉“data”這個詞，直接用數據名稱做標題，別擔心，傻子也會知道那是數據名稱，干嘛還非得寫”DATA”這個詞兒呢？

再比如寫作估計結果時，如果那部分標題就叫”Results”，那就沒內容，或者叫“Effects of X on Y”,也沒有內容。有內容的寫法大概類似于“Higher X, Higher Y”。就像做slides的標題一樣，每個標題都直陳了結果。

標題要用幾個字來傳遞具體的信息，所以瀏覽一遍標題之后，讀者就應該具體的知道更多的信息，并且能夠準確的找到他感興趣的內容在哪里，然后讀下去。

如果標題僅僅是“data”，“Specifications”，“Identification”之類的單詞，那就沒有內容，那就是逼著讀者往細了看。沒人愿意被逼著往細了看，所以人家干脆不看。

三、如果讀者有一分鐘，他應該能讀完這篇論文每一段的第一句話。每一段的第一句話都要“管用”，如果讀者只讀第一句話的話，我必須保證他不會錯過最重要的內容。具體操作上有三點：1）第一句堅決不是鋪墊，然后第二句用什么HOWEVER轉回來。又不是玩兒躲貓貓，沒什么好轉來轉去的。第一句就是直接表達本段的意思，本段的其他內容都是細節，沒有多于第一句所陳述的內容；2）第一句一定要短，不得不用從句的話，不用多于一個的從句，否則就沒意思了；3）單句不成段。論文不是小說，更不是現代詩一路回車。

基本上讀者能在一分鐘內瀏覽完了每一個第一句，我論文80%的內容他就應該知道了，想再讀的話，去讀INTRODUCTION吧。

四、如果讀者有三分鐘的話，INTRODUCTION就是他要讀的全部了。

這個相對簡單多了，因?yàn)槿昼姴畈欢嗄茏x一千字，周旋的余地能大很多。怎么寫INTRODUCTION的經驗之談?dòng)泻芏啵也恢貜?fù)。我個人認為重要的方法有：1）不超過三頁；2）文獻盡量放在腳注中，第一不占地方，第二不阻隔遣詞造句，一會兒一個括號一會兒一個人名的，看著和狗皮膏藥似的，難看；3）先寫要解釋的現象本身，再寫怎么解釋的，最后談貢獻；4）不要出現類似“it is important”的字眼，一件事兒重要與否不取決于你自己說“這是重要的”，直接說事兒，讓讀者自己判斷重要不重要。只有底氣不足或者沒話可說的人，才隔三岔五就來一句”it is important”，吆喝賣大力丸似的。

五、如果讀者是審稿人，真的需要花幾十分鐘細讀的話，寫得好點兒，短點兒，短點兒，短點兒，短點兒，再短點兒。

我 不相信這世上有“客觀存在的真理”，不管你做的是物理化學還是社會科學，都不過是看問題的角度和論述的技巧。哈佛經濟系給研究生的“第二寫作定理”就是： 你的論文質量只取決于你是怎么寫的。再牛逼的想法，寫砸了就是砸了，沒救。（“第一寫作定理”是：你的論文多半得不了諾貝爾獎。）

最讓我受益的寫作建議來自Deirdre McCloskey教授：寫完每一句之后都緊接著問一個“SO WHAT?!”（那有如何呢？），然后往下接，如果接不下去，剛寫完那句根本就沒有存在的必要，刪掉。

最后一條我覺得非常有用的寫論文建議來自David Romer教授，可以用五個短語概括：Just Write!Just Write!Just Write!Just Write!Just Write!

啥也別干，就是寫，論文是寫出來的，不是想出來的。

第二篇：英文論文寫作

2.怎樣寫英文摘要？

可以按照論文的邏輯結構撰寫摘要，如概述、目的、方法、結果、結論、展望的順序。概述(30詞左右)：用最簡潔的語言概括論文內容。例如：This paper is… 或 This study focuses on…

目的(30詞左右)：用To…就可以了，沒有必要使用 in order to 或者 for the purpose of 等較長的表述。

方法(50詞左右)：盡可能具體地說明操作的步驟，其中注意時態的使用。常用的詞匯有：test, study, investigate, examine, analyze, measure, application 等。

結果(50詞左右)：直入主題地?cái)[出結果，如 This paper shows… 或 The results are…

結論(60詞左右)：刪去類似于“The result of the study showed that…” 的贅語，逐條羅列出結論。

展望(20詞左右)：指出研究對未來的意義，如 This paper is of great significance in… 或指出不足。

3.英文摘要有多長？

一般情況下用一段的篇幅完成英文摘要，特殊情況可以分成兩到三段，但最好不要超過三段。長度一般為200字到300字之間。

4.英文摘要用什么語態和人稱？

規范的學術文章通常采用被動語態，突出信息。但由于主動語態的表述更為清楚，現在有些地方也要求采用主動語態。

5.英文摘要用什么人稱？

最好不要出現I，we等第一人稱代詞，而是使用第三人稱，如the author等。

6.英文摘要用什么時態？

摘要的時態以一般現在時為主，表示一種存在于自然界的客觀規律。在特殊的情況下可以使用一般過去時或現在完成時，用來表明一定范圍內的結論或是某一過程的延續性。描述具體的動作時通常用一般過去時，總結主要的結果時通常用一般現在時。

注意：用paper 做主語來描述論文概況時后面常用一般現在時：This paper aims to focus on… 而采用study 來描述相同的內容時則常用一般過去時：This study investigated…

7.一定不能出現的東西

不常見的術語，插圖，表格，數學公式，化學方程式，中文標點，過多的形容詞，無關的背景資料，自我評價等。

200余篇英文論文被SCI/EI收錄的牛人教你如何

寫英語論文

今天我很榮幸地聽了唐遠炎教授關于<<如何寫英語論文>>的講座,唐遠炎教授在國際刊物和國際會議上發表學術論文250多篇(其中包括22本書籍,及章節), 其中 SCI檢索80余篇,EI檢索100余篇.聽了他的講座之后,感覺受益匪淺,有些觀點和思想很有參考價值.在此想跟蟲友們分享一下.通過整理,在寫英語論文過程中,主要注意的有以下幾點:

第一.對于初寫英語論文的人來講.最好不要對原中文論文進行直譯.在談到這個觀點時,唐教授一再強調初寫英語論文一定要“抄”,也就是說搜集一些類似的國外高級刊物的英語論文,在這些論文中找到要表達相似意思的英文句子,使用它的句型.這樣寫出來的論文更適合外國人的思維方式.也能讓外國人更容易理解.同時也更容易被SCI,EI檢索.他還說,按這種方式寫過5篇論文左右,一些地道的英語表達方式就可以熟練的記住了.第二.在寫英語論文之前,首先要確定你要投什么樣的期刊.其實投中文期刊論文也是這樣的.舉個很簡單的例子,前幾天,我有一個同學,寫了一篇用數學問題解決紡織工程問題的論文.導師指導他說:“如果你想投到<<紡織學報>>,在寫論文時,在內容上就應該對一些數學知識作詳細的說明,而紡織知識可以作粗略的介紹,但如果你想投到<<應用數學>>期刊,那就應該對紡織的一些基礎知識作詳細的說明!”.因此,投不同類型的期刊有不同的寫作手法.這樣可以提高論文的錄用率.第三.要想寫出被SCI/EI檢索的文章一定要多花功夫在標題和摘要上.這也許是大家都知道的.外國人更注重創新,只要你覺得自己的觀點有創新點,就不要怕不會被外文收錄.還有一句話我還記憶憂新:“做很少人做的研究領域,做難的研究領域”.這樣的文章很容易被錄用.第四.中國有句古話:“熟讀唐詩三百首 不會作詩也會吟.”在寫英語論文之前,做大量的閱讀是必要的.但最好應該去讀那些英語是母語國家學者寫的論文.但是,必須注意的是.無論是碩士還是博士,永遠應該把專業放在第一位,英語是放在第二位.英語只是一種工具.只是一種幫助你科研的工具.第五.寫英語論文時,不要使用外國人沒有使用過的句型.即使這樣的句子在語法上沒有問題.但是外國人就是看不懂.也就相當于是一個病句.也許這種“病句”對你考CET有用,其實學英語口語也是這樣的.在練英語口語時,希望蟲友們記住:“講外國人從來沒說過的英語,即使語法沒有問題,也是錯的.”我國著名語言學家說過:“想學好一門外語,首先要學好其文化!”

以上就是我總結的一些觀點.希望能對廣大的蟲友們有所幫助.同時希望你們能提出自己的觀點.大家互相交流.實現我們共同的目標!

如果你有新的觀點或?qū)ξ业挠^點不贊同,大家一起探討,謝謝批評指正!

我的郵箱software_wei@163.com

我的其他文章<科研新手必看寶典> http://emuch.net/bbs/viewthread.php?tid=822575

通過這幾天和蟲友們的交流.我總結了一點新的觀點.首先聲明，這是真心話，希望能認真體會，能理解其中真意之后，一定就會懂的如何做研究。我老板平均每個畢業的博士都有6篇以上的SCI，他從來不強求學生發文章，只教如何做研究。下面的問題，他只和我說過一次，之后我的行動與之不相符就會被罵?，F(xiàn)在成了習慣來這樣思考，做事，發現真是事半功倍。

1.你在做研究之前，想過結果能不能發表沒有？往哪里發？

2.寫文章的高手是先把文章大框?qū)懞茫粘鰯?shù)據來，等做完實驗，填完空就可以發了。正謂心中有溝壑。

3.在想不清楚要寫什么，要發到哪里去，自己做的與同行做的有什么出色之處，之前，就不要?jiǎng)邮肿鍪?。去看文獻，去想。想不清楚就做，不如不做 要想這樣子做，就得先看文獻不是？要知道如何把文章架起來，要知道別人是如何討論的，要知道你自己的數據是不是說明了與別人不一樣的東東或別人沒有做過。這個過程就是看文獻，想的過程，這些搞清楚了，寫就簡單了。要是先做事，做完發現別人做過，或無法用理論解釋，豈不是冤大頭？ 這可是哥們兒我被老板罵過NN次得來的血的教訓啊。本來不想把這種丟人的事寫出來的，可看到兄弟們好多在犯和我同樣的錯誤，就寫一下罷。但愿有用

如何寫出好的英文論文

1.用Times New Roman排版，12號字。

2.1寸頁邊距，雙倍行距。

3.按照要求行文。

4.所有引言須標注。

5.以介紹性段落開頭，結尾處要有結論。

6.確認正確完整地表達出自己的思想。

7.更正錯別字。

8.時態須一致。

9.第一以及第二人稱代詞“我”，“我們”，“你”，“你們”等不能出現在文中。

10.引言出處須標注。否則視作抄襲。

11.當引言出現在文中，建議要有提示性句子，如“根據**教授”，避免引言的突兀。

12.使用引言時，句點和逗號均應出現在最后一個引號內，但冒號和分號除外。13.若引言的出處為某書的某章節，書名應加下劃線或者用斜體標注。14.避免頻繁使用插入語（引言除外），分號，冒號，破折號。

15.不使用修飾性問句，如反問，設問等。

16.不使用夸張手法以及俚語。17.了解詞語間不同的用法，例如“their”與“there”，“its”與“it’s”，“to”與“too”，“affect”與“effect”。18.學術性文章中不使用縮略語。19.提交之前仔細檢查。

20.在提交日之前，歡迎給教授提供論文草樣。

第三篇：寫作英文論文的一些心得

寫作英文論文的一些心得

不管論文寫幾十頁，除了倒霉的匿名審稿人之外，沒人會花超過五分鐘去讀。那么合理的寫作策略就是最大程度的節省讀者的閱讀時間，最有效的傳遞信息。具體而言，我力圖達到以下目標：

1.如果讀者只有十秒鐘，他也應該清楚地知道我干了什么，主要結果是什么，用了什么數據，貢獻在哪里。

2.如果讀者有三十秒，他應該在得知以上信息的基礎上，知道我是這么論證的，并且能夠快速在三四十頁的論文中準確地找到他想讀的內容。

3.如果讀者有一分鐘，他應該能知道80%的論文內容，并且覺得似乎應該多花兩分鐘再看看。

4.如果讀者有三分鐘，他應該能準確地知道我在討論的這件事的來龍去脈，準確地知道我的方法我的假設。如果我是一個推銷員的話，我必須做到在三分鐘內把最重要的賣點都說清楚了，說好了，至于讀者買不買，那是另一回事了。5.如果讀者是匿名審稿人，必須花幾十分鐘讀論文的話，那我要做到最小化他的閱讀負擔，別把他老人家惹毛了。

如何達到以上目標呢？我總結的心得散見于各位大牛給年輕人的寫作建議中，我只是把它們換成我的方式再表達出來。這些建議都寶貴，我讀過不少于十遍，寫作的時候更是隔三岔五拿出來對照一番，每次都有收獲。Mankiew收集的建議在這里，Blattman收集了另一些在這里。

一、如果讀者只有十秒，他只會讀ABSTRACT.這個東西極端重要，首先它是論文的第一段，讀者這時候注意力還集中著，腦子還轉著。一般而言，讀者在讀完三段以后注意力就散的差不多了，所以頭三板斧（段）很重要。其次它一般也是論文的最后一段，讀者讀完這段才決定是不是往下看，大部分時候就不繼續看了。所以ABSTRACT要把所有重要的內容表述出來，不能超過150字。對empirical的論文來說，這段要包括研究的問題，使用的數據，identification，和所有重要的估計結果，帶數字的。

有一回我把ABSTRACT寫到150字了，覺得巨滿意，簡潔得不行，簡直不能再多刪一個字。后來去投稿，學報要求必須在100字以內，而且是網絡提交，網頁的對話框是設定好的，一超過100字就變紅字，那是相當吝嗇.沒辦法，再重寫。刪啊刪的，硬是砍掉了50多字，居然也沒覺得損失什么內容?？梢娫?jīng)自鳴得意的簡介，如果再使勁兒逼一下，還是有三分之一多的水分。

要投出去的論文，不管是學報也好，JMP也好，應該盡量沒有因?yàn)閷懽鞫斐傻乃帧?/p>

二、如果讀者有30秒，他會在看完ABSTRACT之后迅速瀏覽論文的章節結構，這時候章節的標題怎么寫就很重要了。

原則是：章節的標題要傳遞信息，除了Introduction和Conclusions之外，所有的標題都應該有內容。

比如，如果一個章節叫“Data”，那就沒有內容。如果叫“Data: CPS 1990-2000”，這就是有內容。或者刪掉“data”這個詞，直接用數據名稱做標題，別擔心，傻子也會知道那是數據名稱，干嘛還非得寫”DATA”這個詞兒呢？

再比如寫作估計結果時，如果那部分標題就叫”Results”，那就沒內容，或者叫“Effects of X on Y”,也沒有內容。有內容的寫法大概類似于“Higher X, Higher Y”。就像做slides的標題一樣，每個標題都直陳了結果。

標題要用幾個字來傳遞具體的信息，所以瀏覽一遍標題之后，讀者就應該具體的知道更多的信息，并且能夠準確的找到他感興趣的內容在哪里，然后讀下去。如果標題僅僅是“data”，“Specifications”，“Identification”之類的單詞，那就沒有內容，那就是逼著讀者往細了看。沒人愿意被逼著往細了看，所以人家干脆不看。

三、如果讀者有一分鐘，他應該能讀完這篇論文每一段的第一句話。每一段的第一句話都要“管用”，如果讀者只讀第一句話的話，我必須保證他不會錯過最重要的內容。

具體操作上有三點：1）第一句堅決不是鋪墊，然后第二句用什么HOWEVER轉回來。又不是玩兒躲貓貓，沒什么好轉來轉去的。第一句就是直接表達本段的意思，本段的其他內容都是細節，沒有多于第一句所陳述的內容；2）第一句一定要短，不得不用從句的話，不用多于一個的從句，否則就沒意思了；3）單句不成段。論文不是小說，更不是現代詩一路回車。

基本上讀者能在一分鐘內瀏覽完了每一個第一句，我論文80%的內容他就應該知道了，想再讀的話，去讀INTRODUCTION吧。

四、如果讀者有三分鐘的話，INTRODUCTION就是他要讀的全部了。這個相對簡單多了，因?yàn)槿昼姴畈欢嗄茏x一千字，周旋的余地能大很多。怎么寫INTRODUCTION的經驗之談?dòng)泻芏?，我不重?fù)。我個人認為重要的方法有：1）不超過三頁；2）文獻盡量放在腳注中，第一不占地方，第二不阻隔遣詞造句，一會兒一個括號一會兒一個人名的，看著和狗皮膏藥似的，難看；3）先寫要解釋的現象本身，再寫怎么解釋的，最后談貢獻；4）不要出現類似“it is important”的字眼，一件事兒重要與否不取決于你自己說“這是重要的”，直接說事兒，讓讀者自己判斷重要不重要。只有底氣不足或者沒話可說的人，才隔三岔五就來一句”it is important”，吆喝賣大力丸似的。

五、如果讀者是審稿人，真的需要花幾十分鐘細讀的話，寫得好點兒，短點兒，短點兒，短點兒，短點兒，再短點兒。

我不相信這世上有“客觀存在的真理”，不管你做的是物理化學還是社會科學，都不過是看問題的角度和論述的技巧。哈佛經濟系給研究生的“第二寫作定理”就是：你的論文質量只取決于你是怎么寫的。再牛逼的想法，寫砸了就是砸了，沒救。（“第一寫作定理”是：你的論文多半得不了諾貝爾獎。）

最讓我受益的寫作建議來自Deirdre McCloskey教授：寫完每一句之后都緊接著問一個“SO WHAT?!”（那有如何呢？），然后往下接，如果接不下去，剛寫完那句根本就沒有存在的必要，刪掉。

最后一條我覺得非常有用的寫論文建議來自David Romer教授，可以用五個短語概括：Just Write!Just Write!Just Write!Just Write!Just Write!啥也別干，就是寫，論文是寫出來的，不是想出來的。

第四篇：英文論文寫作常用句子

beginningl in this paper, we focus on the need for l this paper proceeds as follow.l the structure of the paper is as follows.l in this paper, we shall first briefly introduce fuzzy sets and related conceptsl to begin with we will provide a brief background on the introductionl this will be followed by a description of the fuzzy nature of the problem and a detailed presentation of how the required membership functions are defined.l details on xx and xx are discussed in later sections.l in the next section, after a statement of the basic problem, various situations involving possibility knowledge are investigated: first, an entirely possibility model is proposed;then the cases of a fuzzy service time with stochastic arrivals and non?fuzzy service rule is studied;lastly, fuzzy service rule are considered.reviewl this review is followed by an introduction.l a brief summary of some of the relevant concepts in xxx and xxx is presented in section 2.l in the next section a brief view of the....is given.l in the next section, a short review of...is given with special regard to...l section 2 reviews relevant research related to xx.l section 1.1 briefly surveys the motivation for a methodology of action, while 1.2 looks at the difficulties posed by the complexity of systems and outlines the need for development of possibility methods.bodyl section 1 defines the notion of robustness, and argues for its importance.l section 1 devoted to the basic aspects of the flc decision?making logic.l section 2 gives the background of the problem which includes xxxl section 2 discusses some problems with and approaches to, natural language understanding.l section 2 explains how flexibility which often...can be expressed in terms of fuzzy time?windowl section 3 discusses the aspects of fuzzy set theory that are used in the...l section 3 describes the system itself in a general way, including the..and also discusses how to evaluate system performance.l section 3 describes a new measure of xx.l section 3 demonstrates the use of fuzzy possibility theory in the analysis of xx.l section 3 is a fine description of fuzzy formulation of human decision.l section 3, is developed to the modeling and processing of fuzzy decision rulesl the main idea of the flc is described in section 3 while section 4 describes the xx strategies.l section 3 and 4 show experimental studies for verifying the proposed model.l section 4 discusses a previous fuzzy set?based approach to cost variance investigation.l section 4 gives a specific example of xxx.l section 4 is the experimental study to make a fuzzy model of memory process.l section 4 contains a discussion of the implication of the results of section 2 and 3.l section 4 applies this fuzzy measure to the analysis of xx and illustrate its use on experimental data.l section 5 presents the primary results of the paper: a fuzzy set model..l section 5 contains some conclusions plus some ideas for further work.l section 6 illustrate the model with an example.l various ways of fuzzification and the reasons for their choice are discussed very briefly in section 2.l in section 2 are presented the block diagram expression of a whole model of human dm systeml in section 2 we shall list a collection of basic assumptions which a...scheme must satisfy.l in section 2 of this paper, we present representation and uniqueness theorems for the fundamental measurement of fuzziness when the domain of discourse is order?dense.l in section 3, we describe the preliminary results of an empirical study currently in progress to verify the measurement model and to construct membership functions.l in section 5 is analyzed the inference process through the two kinds of inference experiments...this sectionl in this section, the characteristics and environment under which mrp is designed are described.l we will provide in this section basic terminologies and notations which are necessary for the understanding of subsequent results.next sectionl the next section describes the mathematics that goes into the computer implementation of such fuzzy logic statements.l however, it is cumbersome for this purpose and in practical applications the formulae were rearranged and simplified as discussed in the next section.l the three components will be described in the next two section, and an example of xx analysis of a computer information system will then illustrate their use.l we can interpret the results of experiments i and ii as in the following sections.l the next section summarizes the method in a from that is useful for arguments based on xxsummaryl this paper concludes with a discussion of future research consideration in section 5.l section 5 summarizes the results of this investigation.l section 5 gives the conclusions and future directions of research.l section 7 provides a summary and a discussion of some extensions of the paper.l finally, conclusions and future work are summarizedl the basic questions posed above are then discussed and conclusions are drawn.l section 7 is the conclusion of the paper.chapter 0.abstractl a basic problem in the design of xx is presented by the choice of a xx rate for the measurement of experimental variables.l this paper examines a new measure of xx in xx based on fuzzy mathematics which overcomes the difficulties found in other xx measures.l this paper describes a system for the analysis of the xx.l the method involves the construction of xx from fuzzy relations.l the procedure is useful in analyzing how groups reach a decision.l the technique used is to employ a newly developed and versatile xx algorithms.l the usefulness of xx is also considered.l a brief methodology used in xx is discussed.l the analysis is useful in xx and xx problem.l a model is developed for a xx analysis using fuzzy matrices.l algorithms to combine these estimates and produce a xx are presented and justified.l the use of the method is discussed and an example is given.l results of an experimental applications of this xx analysis procedure are given to illustrate the proposed technique.l this paper analyses problems in l this paper outlines the functions carried out by...l this paper includes an illustration of the...l this paper provides an overview and information useful for approachingl emphasis is placed on the construction of a criterion function by which the xx in achieving a hierarchical system of objectives are evaluated.l the main emphasis is placed on the problem of xxl our proposed model is verified through experimental study.l the experimental results reveal interesting examples of fuzzy phases of : xx,xxl the compatibility of a project in terms of cost, and xx are likewise represented by linguistic variables.l a didactic example is included to illustrate the computational procedurechapter 1.introductiontimel over the course of the past 30 years,..has emerged form intuitive l technological revolutions have recently hit the industrial worldl the advent of...systems for has had a significant impact on the l the development of...is exploredl during the past decade, the theory of fuzzy sets has developed in a variety of directions,l the concept of xx was investigated quite intensively in recent yearsl there has been a turning point in...methodology in accordance with the advent of...l a major concern in...today is to continue to improve...l a xx is a latecomer in the part representation arena.l at the time of this writing, there is still no standard way of xxl although a lot of effort is being spent on improving these weaknesses, the efficient and effective method has yet to be developed.l the pioneer work can be traced to xx [1965].l to date, none of the methods developed is perfect and all are far from ready to be used in commercial systems.objective / goal / purposel the purpose of the inference engine can be outlined as follows:l the ultimate goal of the xx system is to allow the non?experts to utilize the existing knowledge in the area of manual handling of loads, and to provide intelligent, computer?aided instruction for xxx.l the paper concerns the development of a xxl the scope of this research lies inl the main theme of the paper is the application of rule?based decision making.l these objectives are to be met with such thoroughness and confidence as to permit...l the objectives of the...operations study are as follows:l the primary purpose/consideration/objective ofl the ultimate goal of this concept is to providel the main objective of such a...system is tol the aim of this paper is to provide methods to construct such probability distribution.l in order to achieve these objectives, an xx must meet the following requirements:l in order to take advantage of their similarityl more research is still required before final goal of...can be completedl in this trial, the objective is to generate...l for the sake of concentrating on...research issuesl a major goal of this report is to extend the utilization of a recently developed procedure for the xx.l for an illustrative purpose, four well?known or problems are studied in presence of fuzzy data: xx.l a major thrust of the paper is to discuss approaches and strategies for structuring..methodsl this illustration points out the need to specifyl the ultimate goal is both descriptive and prescriptive.l chapter 2.literature reviewl a wealth of information is to be found in the statistics literature, for example, regarding xxl a considerable amount of research has been done..during the last decadel a great number of studies report on the treatment of uncertainties associated with xx.l there is considerable amount of literature on planningl however, these studies do not provide much attention to undertainty in xx.l since then, the subject has been extensively explored and it is still under investigation as well in methodological aspects as in concrete applications.l many research studies have been carried out on this topic.l problem of xx draw recently more and more attention of system analysis.l attempts to resolve this dilemma have resulted in the development of l many complex processes unfortunately, do not yield to this design procedure and have, therefore, not yet been automated.l most of the methods developed so far are deterministic and /or probabilistic in nature.l the central issue in all these studies is to l the problem of xx has been studied by other investigators, however, these studies have been based upon classical statistical approaches.l applied...techniques tol characterized the...system asl developed an algorithm tol developed a system called...whichl uses an iterative algorithm to deducel emphasized the need tol identifies six key issues surrounding high technologyl a comprehensive study of the..has been undertaken l much work has been reported recently in these filedl proposedl presentedl state thatl point out that the problem of l describedl illustratedl indicatedl has shown / showedl addressl highlightsl a study on...was done / developed by []l previous work, such as [] and [], deal only withl the approach taken by [] isl the system developed by [] consistsl a paper relevant to this research was published by []l []'s model requires consideration of..l []' model draws attention to evolution in human developmentl []'s model focuses on...l little research has been conducted in applying...tol the published information that is relevant to this research...l this study further shows thatl their work is based on the principle of l more history of...can be found in xx et al.[1979].l studies have been completed to establishedl the...studies indicated that l though application of xx in the filed of xx has proliferated in recent years, effort in analyzing xx, especially xx, is lacking.problem / issue / questionl unfortunately, real-world engineering problems such as manufacturing planning do not fit well with this narrowly defined model.they tend to span broad activities and require consideration of multiple aspects.l remedy / solve / alleviate these problemsl...is a difficult problem, yet to be adequately resolvedl two major problems have yet to be addressedl an unanswered questionl this problem in essence involves using x to obtain a solution.l an additional research issue to be tackled is....l some important issues in developing a...system are discussedl the three prime issues can be summarized:l the situation leads to the problem of how to determine the...l there have been many attempts to l it is expected to be serious barrier to l it offers a simple solution in a limited domain for a complex problem.l there are several ways to get around this problem.l as difficult as it seems to be, xx is by no means new.l the problem is to recognize xx from a design representation.l a xx problem can trace its roots to xx.l xx [1987] used a heuristic approach to simplify the complexity of the problem.l several problems are associated with them.l although some progress has been made in this area, at least two major obstacles must be overcome before a fully automated system can be realized.l most problems in practice are complicatedl more problem surface here.l hamper effort toward a xx systeml in order to overcome the limitations due to incomplete and imprecise xx knowledge, a xx program has been developed, which bases its knowledge upon the statistical analysis of a sample population of xxl the above difficulties are real challenges faced by researchers attempting to developl this type of mapping raises no controversy to the issue of membership function determination.l however, attempts to quantify the xx have met both theoretical and empirical problems.l it has become apparent that in order to apply this new methodological framework to real?world problems and data, we have to pay attention to the problems of xx and xx.chapter 3.proposed methodologyassumptionl in the case when the assumption of a xx seems to be too restrictive or inadequate, the formulation with fuzzy termination time, i.e.given by a fuzzy set in the space of control stages, may be applied.l we assume here the fuzzy constraints to be state?dependent, and the fuzzy goal to be the same for all the control states, xx, which stems from the problem's nature.l an approach to the solution of this problem is presented under the assumption that the sampling rate decision can be made prior to the execution of the experiment, as opposed to being made while the experiment is in progress.l another assumption made above is that there are precise odds at which the expert is indifferent.l main simplifying assumptions are:l this, in our view, is a questionable assumption.outline / structure / modulel an outline of the researchl information is incorporated within the schemel is built into...structurel a nice modular structure.l the principles of...are applied as modularized criteriaclassificationl a xx system comprises three main components:l must decompose the original..into a set of..l consists of the following steps:l this is summarized in the following steps:l can be broadly classified into the following areas:l can be characterized by its function of effectively processing thel can allow further breadth of application of...into morel the following steps should be followedl xx can be classified by a different ways.l based on the xx, one may classify xx into the following:l this catalog may change due to wear, breakage, and purchasing.systeml unlike many conventional program, expert systems do not usually deal with problem for which there is clearly a right or wrong answer.l the system consists of both...and...l the system has a hierarchical modular architecture organized on three levels.l expert system domains are area of expertisel to develop a xx system for xx, the following factors must be considered:l the system has been developed / designed to determinel the system has proven to be able to l the domain in which an expert system operates is a particular domainl the system comprises a...withl the system is [feature-oriented ] / based on the...techniquel the system environment must be relatively stablel the system is utilized to generate, load, store, update and retrieve...l the development of a xx system has two stages: xx stage and xx stage.l the most essential part of..system is the...l the successful developments in ess have made them an important tool in the development of l an automated system was developed forl in this case, the system can be considered to be generative.l an interactive automatic...systeml a..is commonly thought of as a truly integrated..systeml should be capable of being generated from a...systeml xx is an important part of the integrated system.l the model consists of four rule bases, each of which addresses a separate problem in the hierarchy of scheduling decision.l the rule bases are linked to each other in a chin?like manner in the sense that the consequent of one rule base constitutes a part of the antecedent of the next rule base.l the rule base consists of all possible combinations of the linguistic terms associated with the linguistic variable of the antecedent of a rule.computer systeml the system has been implemented using prolog language in an ms?dos environment.prolog was chosen because it offers a well known and flexible environment in which fuzzy reasoning may be easily implemented.l the current version of the xx program when compiled with watfor77 results in an executable code of about 270k bytes.typical run time, when run on a xx computer(an ibm compatible machine)operating at 4.77 mhz with 640k ram, ranges from 10 min to 2h, depending on the size(or complexity)of the problem.l time consuming procedures have been implemented in c?language and directly linked to the prolog environment.l the xx process, once the xx's data has been entered, requires approximately 180 seconds.l it should be noted that the computation was done with a 20 hhz, 80386?based microcomputer equipped with a 80387 math co?processor.l the computer programs used for the analyses, one based on the xx method and the other based on the new method, were written in fortran with a compiler that supports the math co?processor.l lisp, prolog give maximum flexibility but also maximizes development time.l internal representation is the way a model is represented in the computer.l an interactive menu-driven procedure is used in this studyl shell can be develop very fast at the cost of time fairly severe limitations.l while there is no measurable saving of time for the case involving five criteria, the saving is dramatic for the case involving 10 criteria--the computation time reduces from 10 hr 40 min to about 1 min.l this combination is being implemented in an objected?oriented programming environment(smalltalk?80 system)to solve problems encountered in construction xxx.method / approach / study / process model / equation /algorithm / rule / formula / techniquel a discussion is presented of a problem-solving systeml to improve the efficiency of the method, the following approach may be applied.l in order to an investigation was made to find the causes of thel although large collections of rules and equations have been complied, none are generally accepted l this approach will be explained and discussed thoroughly in the body of the report.l this can be accomplished byl this algorithm to compute the total cost can be described step by step as follows:l the above preliminary analysis has provided important informationl various methods have been proposed for selecting an optimum...l these concepts have been applied to l on the basis of the concept mentioned above,l this can be achieved byl this fact suggests that a new conceptl this was accomplished by taking...l the preparatory stage is very time consuming process.l test are performed for validity, completeness, and compatibilityl there is little hope of achieving successful...l there has been an increasing awareness of the potential of using most..so far made have not taken this approach, with the exception ofl only a few studies can be found.l it is a very tedious process to go throughl it is only when..has been completed that..may be effectedl the entire interpretation process is conducted in one's head.l these approaches are sometimes very tedious.l several techniques can be usedl a polynomial parametric model can be written as [the following]/[follows]:l a xx model is constructed/formulated using xx.l a xx model represents an xx by its xx.l a process decision model captures the logic essential tol from the equation above, xx is equal to the summation of xx times the...l the validity of a xx model can be checked using euler's formula.l given a model, one can mathematically determine whether...or...l equations for xx need to be derived and implemented in the system.l a number of heuristic rules have been developed forl optimum..techniques can be made more reliable by...so thatl an algorithm based on the characteristic...is used to determinel euler's formula states the following:l the completed model should agree with the formula.l for manufacturing purposes, a detailed and precise model of the object is necessaryl engineering design models are very well defined;therefore, l to keep the domain narrow enough to be implementable, yet wide enough to be useful.point of viewl from an implementation standpoint,l from the point of view of this application,l from this point of view, zadeh suggested an inference rule named xxx(cri for short).l information is the meaningful interpretation and correlation of some aggregation of data in order to allow one to make decisions.l from a practical point of view, the computational aspects of an flc require a simplification of the fuzzy control algorithm.l the use of a hammer to insert screws, although partly effective, tends to distort, destroy, and generally defeat the purpose of using a screw [kusiak ai implications for cim p.129]justificationl we choose the so called xx in our experiment because it has received wide acceptance and canl prolog was chosen because it offers a well known and flexible environment in which fuzzy reasoning may be easily implemented.l the rationale behind this is that it can be much easier for an estimator to rate a cost as high than to attempt to place a dollar value on the estimate.l this strategy has been widely used in fuzzy control applications since it is natural and easy to implement.l a function definition expresses the membership function of a fuzzy set in a functional form, typically a bell?shaped function, etc.such functions are used in flc because they lead themselves to manipulation through the use of fuzzy arithmetic.l it should be noted that in our daily life most of the information on which our decisions are based is linguistic rather than numerical in nature.seen in this perspective, fuzzy control rules provide a natural framework for the characterization of human behavior and decisions analysis.l many experts have found that fuzzy control rules provide a convenient way to express their domain knowledge.this explains why most flcs are based on the knowledge and experience which are expressed in the language of fuzzy “if?the” rule.chapter 4.examplesexample/ datal the data used in the following example was taken from an experiment in which xx was measured between x and x using a xx technique.l the data consists of over xx measurements.l an example of xx is discussed and the control rules of xx are compared with a xxl examples of complex processes to which this technique may be applied are xx, xx, etc.l the following example is constructed only for the purpose of illustrating the computational procedure discussed.l this example clearly demonstrates that the profile of an individual xx, or a very small group of xx, with no enough data to be studied statistically, can be meaningfully analyzed by fuzzy possibilistic methods.l there is no space here to go into detail on all these methods, but deserve a mention and the bibliography will point to detailed references for those wishing this level of detail.l note that the golf ball spotting example is used throughout the paper.comparisonsl as well, the pros and cons of these representations from a process planning point of view will be discussed.l the method of using xx to implement xx described by zadeh(1973)appeared more suitablel as discussed [in the previous section]/[preciously],relationl we can not invert f' directly because it defines a many-to-one mapping.l the relationships appear very complicatel lifting tasks involve complex and imprecise relationship between the task variables and the human operator's characteristics.l these methods are based on the relationship between...and...l the fundamental concept of a fuzzy rating language is that we can establish a relationship among terms such as high, medium, and low, and then modify these relationships.l this article will thus mention the latter as well as the former.l the former two bear a close relation to a fuzzy cartesian product.importancel the emphasis is on an implementation of a general approach to rule based decision making.consideration / attentionl careful evaluation is necessary to ensure l such a formulation does not change further considerations.l considerable attention has been paid tol attention should be paid to an important finding of this investigation.l caution should be exercised in this process to avoid...l primary consideration is given to...components, though others can be accommodatedl after...has been defined by..., a carefully analysis is carried out/performed to determinel a number of factors such as...need to be taken into consideration before making the appropriate decision.l it should be noted thatl it is important to point out that...l these considerations have heightened interest in the possibility of providing...l we should stress the fundamental importance of the xxchapter 5.results.advantages / disadvantagel one of the major advantages of this new measure of xx is that it can be applied to the experimental study ofl one advantage of using a..is the ease of preparing it.l the xx system is versatilel it has a very fast decision making processl all the algorithms involve mostly logical operations.l it can be easily and without additional cost implemented in a microprocessor?based environment.l it can reduce the waste of designing from scratch.l the advantages of using a xx to represent xx are the following:l however, xx is not without its shortcomings.l in most cases, the xxx shows an improvement over the existing xxx.l compared to the existing xx, the impacts of the xx are generally reduced by 5% to 9%.l the “best case” results shows a savings of 6% to 9%.l most of the existing works based on xx approach can only recognize a xx.l most of the above methods are computational expansive and limited to xx.l some other advantages of xx are the following:l the problem is the limitation of this method to a limited domain of parts.l it proved limited in application because it demanded precision in system modeling that was impossible in practice.l there are advantages to be gained in the structuring of costs and benefits, the use of xx, l the disadvantages of this method are also disadvantages of conventional xx approaches.l this combines the best features of both techniquesl hopefully, this tool can be as the reference framework of for developing a xx platform, and helping the administration, marketing, and knowledge management activities in virtual communities.resultsl an improvement on the result shown above can be made by based on the data providedl discussion of these theories is beyond the scope of this reviewl based on the information contained in thisl the result can be categorized into nine classesl the results are illustrated by an examplel the experimental results for each xx time are reported in table 2.l from the results obtained so far, it seem thatl because of the inaccuracy of the..., a conclusion cannot be drawn as l although much effort has been made to., this reality is far from completion.l the results indicate that the total benefits are higher than the total costs.l their results may then serve as guidelines for lower level models, less fuzzy and more detailed.chapter 6.conclusionl from the discussion, one may conclude that...l form the above discussion, the conclusion can be reached that l the conclusions drawn are also validl in conclusion to this, it becomes obvious that the problem of xx lies not only in...l we have attempted to introduce some concepts associated with a theory of xx based on fuzzy sets.l considerable more work, hopefully, will be done in this areal a fuzzy set procedure is proposed to solve xx selection problems interwoven with imprecise datal employing the compositional rule of inference, the assessment of the xx compatibility in achieving prescribed xx projectiles in any level of the hierarchy is made possible.l this paper has presented a theoretical and experimental study of the xx process and xx concept.l the experimental research results will hopefully serve as useful feedback information for improvements for xx work.l the scope of this contribution was to introduce a xx method.l in general, fuzzy sets theory provides an alternative foundation for xx analysis in a fuzzy environment.future researchl thus, first extension of the approach could be, l present some cues for a further approach from fuzzy sets theory application to l some improvements to the scheduling aspect of the model may be brought through additional levels in the hierarchy for more detailed representation of the scheduling activity.tables and figuresl figure 7-1 sketches these relationships.l the graphical representation of these functions is shown in figure 1.l the xx may be depicted as in figure 1.l figure x shows the schematic diagram of the l figure 1 though 2 provide a...thatl the architecture of this expert system for....is illustrated in figure 2.l figure 2 gives the outline of an...systeml table shows thel as shown in table 1 and 2l this concept is illustrated in figure 2l at the top of table xx are shown two blocks of data.l each table or matrix has constructs xx through xx as row?headings, xx through xx as column?headings.l a table of..is developed and significant recommendations are made.conjugationto indicate additionl additionally, again, also, and then, as can be easily understood, besides, equally important, especially, finally, for the same reason, first, further, furthermore, in addition, last, likewise, moreover, next, second, third, too, evidently, obviously, roughly speaking, broadly speakingto indicate cause and effectl accordingly, as a result, consequently, for this reason, hence, in short, otherwise, then, therefore, thus, trulyto indicate comparisonl in a like manner, likewise, similarly , alternativelyto indicate concessionl after all, although this may be true, at the same time, even though, even so , i admit, naturally, of courseto indicate contrastl and yet, at the same time, but, for all that, however, yet, in fact, in contrast, in the real life, in spite of, nevertheless, notwithstanding, normally, on the contrary, on the other hand, still, traditionally, rather, unfortunately,to indicate time relationshipsl after a short time, afterwards, as indicated earlier, as long as, as soon as, at last, at length, at the moment, at that time, at the same time, before, earlier, currently, immediately, in the meantime, in recent years, lately, later, meanwhile, often, of late, presently, recently, soon, shortly, since, thereupon, temporarily, therefore, until, when, whileto indicate special features or examplesl for example, for instance, incidentally, indeed, in fact, in other words, in particular, in practice, specifically, that is, to illustrate, in this respect, theoretically, as mentioned before / aboveto indicate summaryl in brief, in conclusion, in short, in summary, on the whole, to conclude, in general, to summarize, to sum up, as a result, ultimately,verb phasel build a..modell build up the key linkl began a new era in...l can be regarded as / achieved / used to/for / found / obtained throughl can result inl carries out...tasks l production information in order to simultaneouslyl contains all information necessary to describel do not make use of production informationl deals withl end with failurel fetch the information from the model directlyl has great potential / yet to be resolved / spurred the development of / been recognized as l be aimed at / built up / carried out by / essentially concerned with / considered to be the key technology / associated with each feature of a composite component / cable of / currently implemented for / demonstrated by an example / finally reached / made equal to / equivalent to / more suitable to / oriented to / interpreted as / pointed out / potentially of great benefit in the complex task of / shown in / used to effectively guide the searchl makes use of l make upl meets the needs of real life production,/ the current demands placed upon itl must be justifiedl point outl play an important rolel relates tol rely on l satisfy the needsl determine the total requirements for the...l uses...as a key to search for...l without relying onl will be available/ performed/ overlookednoun phasel a basic technical function of l a critical needl a key / principle feature ofl a substantial impact onl an intensive review was conductedl an increasing need for expanding the application of....l an important component / function / aspect / issuel each rule is numbered in sequencel each of these involvesl for this calculation, it is necessary to definel in the physical environment / integration ofl in the reality of situations where …l many aspects of l most past efforts have been spent on...l common sense to a well studied and documented technical field.l sources of additional information on...are listedl systematic and rationally structured formatl the basis on which a range of...operations can be established is shownl the basic philosophy / principles of / key element / general hypothesis / candidate list of / concept of...has attracted wide interest / function is concerned with / heart / impact / nature / role / task of / kernel functions l the number of parts needed to l the above statement means thatl the output data is passed to l the proposed method / underlying principlel the recommendations made in this report, if implemented, shouldl this information resides inl this process is composed of...different...operationl along with the use of l concerning general aspects ofl due tol for later use in generating...,l in turn,l it is believed / noted / assumed / suggested / shown / quite evident / appears / implies that / intended for / of no important tol it can be claimed/concluded thatl it demonstrates the decisions required of l it also provides information to..l it becomes essential to l let...be the probability thatl once...is written, it is compiled into...l suppose it is observe

xiexiebang.com范文網[CHAZIDIAN.COM]

第五篇：英文論文寫作體會

本人近日僥幸在某SCI索引的外刊發表一篇論文，想在這里淺談一下發外文的體會，供學弟、學妹們參考。我覺得發外文時主要注意以下幾點：1.論文中必須至少有一個創新點。創新點或是開創性的工作，或是對原有工作的改進，或是提出一種新方法。老外對公式不是很看重，主要看你是否有創新。2.在外刊上發過文章的同學都知道，Introduction部分是最難寫的，我認為在這部分中不但要提及題目的意義，別人的研究成果，更重要的是要指出你這篇論文的貢獻，以吸引審稿人的眼球。3.標題也很重要，即要新穎又要體現你的論文的主要工作及采用的方法4.實驗素材要豐富，以數據說話，讓人感覺你作了許多工作。5.要直接用英文寫，學會用英語語言思考問題，不要先寫成漢語再翻成英語，這樣寫出來的東西總有點中國英語的味道，讓審稿人看起來不舒服。6.平時多看一些牛刊的論文，摘抄一個常用的語句及段落，如開場白、題目的意義、章節安排、語氣轉折等，活學活用。這樣寫出來的文章看起來就很漂亮了。7.對審稿人提出的修改意見或建議一定要認真對待，盡量滿足他們的要求，如你認為某些意見或建議不妥，要在回信中加以闡述。8.認真研究所發期刊的參考文獻的引用格式。我的一位師兄就是因?yàn)檫@點直接被拒了。